answersLogoWhite
Auto Parts and Repairs
Chevy Lumina
Pontiac Montana

Where is the pcv valve on a 1990 Chevy Lumina?

454647

Top Answer

User Avatar
Wiki User
2005-01-06 16:43:48
2005-01-06 16:43:48

On the 2.5L 4 cylinder, it is located right on top of the valve cover towards the front (left) of the motor.

1

Related Questions

User Avatar

Wete does the pcv tubing go on1999 chevy lumina

User Avatar

The PCV valve on a 1987 - 1990 Chevy Celebrity is in the top center of the valve cover nearest the firewall.

User Avatar

It's under the plenum in the back of the engine.

User Avatar

The pcv is located in the rear valve cover , partly covered by the plenum and intake , and hooks to the underpart of the plenum.

User Avatar

The PCV valve is located in the rear valve cover next to the firewall. It can be reached and changed without rotating the engine forward although it is a bit of a struggle.

User Avatar

where is the PCV valve located on a 2004 chevy tahoe

User Avatar

the pcv is located under the fuel injection plenum, towards the back of the engine as opposed to some newer models that have this valve located in the front of the engine on the valve cover

User Avatar

All engines have a PCV valve.

User Avatar

The PCV valve is found in the valve cover on the passenger side.

User Avatar

The PCV valve on a 2002 Chevy Cavalier is located on the back of the valve cover. It is a plug in type.

User Avatar

in what location can I find the pcv valve on my 2002 chevy tahoe

User Avatar

On a 1996 Chevy Camaro, the PCV valve is located on the right side of the valve cover. There is a hose that runs from the PCV valve and connects to the back of the intake manifold.

User Avatar

The PCV Valve on a 1995 Chevy Lumina 3.4L is located in the line that comes off the rear intake manifold between the throttle body & the intake. This line is on the back side of the throttle body and intake manifold where the two come together and make a "L" shape. The middle of the "L" shape has a approx. 1/2" rubber line that comes out and is held in place by a sqweeze tight mettle clamp. If you follow that line for aprox. 6" you will come to the PCV Valve. Mine was covered with another 1" hose over the top of it, so you will need to remove that carefully. The bottom of the PCV Valve is a plastic line. You do not need a L shape PCV valve, my 3.4L lumina needed a straight PCV Valve. it only took me 4 hours to find it :(

User Avatar

I have the repair manual in front of me (Haynes), and it says that the Lumina has the PCV valve in the valve cover. Hope this helps? On the 1992 Sable with either the 3.0L or 3.8L it is on the back valve cover (closest to the passenger compartment). It is harder to get to the PCV on the 3.8L engine. The actual PCV is connected to a rubber grommet on the engine valve cover and the other side PCV there is a hose that leads to another part of the engine.

User Avatar

It is on the valve cover that's pressed against the firewall. The upper intake needs to come off to get to it, and the gasket on the uppert intake (plenium) will likely be replaced. Be sure to check the line running to the pcv for roting.

User Avatar

The PCV sits in a rubber grommet in the top of the valve cover.

User Avatar

No PCV valve on this engine. Has "PCV system". Hose from valve cover to throttle body. Nothing to replace.

User Avatar

The PCV valve is located on the top of the valve cover. There will be a large vacuum line connected to it.

User Avatar

The 1999 Chevy Geo Metro 1.0 liter engine PCV valve can be found on top of the engine. The PCV valve will be behind the air cleaner housing.

User Avatar

The PCV valve on a 2002 Chevy Suburban 6.0 liter engine is located in the engine. You cannot miss the valve.

User Avatar

pcv valve-location-1990 Pontiac bonnevilpcv valve on 1990 Pontiac Bonneville---location -on passenger side of engine, under alternator, push over wiring harness wires, as this maybe covering from sight.

User Avatar

The PVC valve is in the valve cover.

User Avatar

The 1998 Cavalier does have a PCV valve. The valve is in the side of the valve cover, held in by a metal ring.

User Avatar

were and how do you change a PVC valve on a Chevy avalance


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.