Crankcases and PCV Valves
Mazda Protege
Honda Civic DX

Where is the pcv valve on a 1993 Mazda Protege DX?

414243

Top Answer
User Avatar
Wiki User
2005-09-29 01:46:44
2005-09-29 01:46:44

it should be at top left corner of valve cover go to auto parts store for manual about $15.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

On my 1997 Protege a hose runs from the valve cover to the air intake assembly. Where the hose connects to the valve cover is the PCV valve.

User Avatar

on 99 models with 1.8 liters on top of engine in center of valve cover

User Avatar

Where is the PCV Valve on a Mazda B2300 2003

User Avatar

The PCV valve on a Mazda 6 V6 is located on the valve cover near the back of the engine. The PCV valve is usually a plastic or metal part that looks like a small tube sticking up out of the valve cover.

User Avatar

The PCV valve on a 1993 F150 is located in the top of the valve cover. it is a plug in type, and is easily replaceable.

User Avatar

Did you ever find the location of the pcv valve?

User Avatar

pcv valves are always located on valve covers (but not all vehicles have pcv valves)

User Avatar

some models the pcv valve is in the valve cover on others the valve plugs into intake manifold and is connected to valve cover by hose

User Avatar

Remove the rubber piece of pipe on top of your cam cover. it is the one connected to a hole with a grommet. unplug the pcv valve from the pipe. make sure you clean the inner part of the grommet. buy the proper pcv valve and reinstall connect it back to the curve piece of rubber pipe .

User Avatar

On a 1993 Buick Regal 3.1L, the PCV valve is located on the intake manifold. It is situated underneath the MAP sensor.

User Avatar

On a 1999 Mazda B3000, the PCV valve is in one of two places, depending on the engine. On SOHC 4-cylinder engines, the PCV valve is mounted on the oil separator on the left side of the engine. On DOHC 4-cylinder engines, the valve is behind the coolant bypass hose..

User Avatar

Pull straight up on the PCV valve to remove it from the valve cover, then pull off the hose from the PCV valve, install the new one by doing the opposite of removal.

User Avatar

The PCV valve is located on the back side valve cover. It should be a plug in type and easy to change.

User Avatar

pass.side valve cover at the rear

User Avatar

The PCV valve is located on the passenger side valve cover, towards the front of the car, which should have a small rubber hose coming off of it.

User Avatar

PCV VALVE - Under hood, center, upper engine area, mounted in intake manifold

User Avatar

AnswerIt doesn't have a PCV valve.Actually it does. The PCV valve for a 1993 Nissan Altima is located behind the engine below the intake. Buy a Haynes manual, the PCV is VERY tough to get too but it can be done. You can only get two bolts from the top but have to go from underneath the car to detach the hose.

User Avatar

On the engine family .. LTK 3.0 T5 FCC1 there is no PVC valve on 1990 Mazda MPV

User Avatar

If you have the 3.0L the pcv valve is located under the fuel rail under the intake manifold. You cannot remove with finger power...The valve turns out counter clockwise with some force.

User Avatar

Not sure about the 1989, but 1990-1993 it goes into the valve cover. Look for a hose running to the valve cover and the PCV valve should be what is at the end of it pushed into the valve cover.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.