Crankcases and PCV Valves
Toyota Sienna
Grand Prix GT

Where is the pcv valve on a 1998 Toyota Sienna?

646566

Top Answer
User Avatar
Wiki User
2006-04-01 20:02:06
2006-04-01 20:02:06

If you stand facing the engine, the PCV valve is on the left side top of the engine near the back. It is connected to a short (6 inch) tube. It's difficult to get at, but you can see it and get at it if you reach back in and use a flashlight.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Where's the PCV valve located on a 2004 Toyota Sienna van

User Avatar

The PCV valve on a 2006 Toyota Sienna is located along the side of the top of the engine. It allows gases which are built up in the engine to be removed and recycled.

User Avatar

The PCV valve on a 1998 Toyota Corolla is located on top of the engine, on the passenger side. It connects the intake manifold with the valve cover.

User Avatar

4 cylinder does not have pcv valve.

User Avatar

on a 1998 Pontiac gan am ,they do not have a pcv valve.

User Avatar

Where is pcv valve on 1998 daewoo leganza

User Avatar

The PCV valve is located on top of the valve cover in the middle.

User Avatar

The PCV valve is usually on top of one of the valve covers.

User Avatar

The PCV valve on a 1997 Toyota Avalon is located on top of the engine. It connects the left valve cover with the intake.

User Avatar

The 1998 Cavalier does have a PCV valve. The valve is in the side of the valve cover, held in by a metal ring.

User Avatar

pcv valves are always located on valve covers (but not all vehicles have pcv valves)

User Avatar

The PCV valve on a 1987 Toyota Corolla FX16 is located behind the alternator. It is under the intake manifold.

User Avatar

It is really easy. Twist the old PVC valve and replace it with the new one. Go to a valvoline rapid oil change store, they can show you were it's located.

User Avatar

# The PCV valve is located in the valve cover # Detach the hose from the valve then unscrew the valve from the valve cover

User Avatar

The PCV valve for a 1998 Monte Carlo should plug into the valve cover. Twist and pull it to remove and replace it.

User Avatar

http://www.4x4wire.com/toyota/maintenance/tacoma_4runner_30k/maintenancep5.html Link explains where PCV valve is, how to test it !!!!

User Avatar

smack in the middle of the valve cover

User Avatar

PCV valve is located on the of the valve cover. There is a hose connecting the valve and the intake manifold. You should not have problems locating it.

User Avatar

The 1998 and newer S10 with the 2.2L engine does not have a serviceable pcv valve.

User Avatar

Where is the PCV valve located on 97 Toyota Camry and how to replace it.Read more: Where_is_the_PCV_valve_located_on_97_Toyota_Camry_and_how_to_replace_it.

User Avatar

The pcv valve should be located on top of the valve cover. It plugs in, and should pull out with some gentle coaxing.

User Avatar

Putting a PCV valve on a Toyota Tacoma is pretty easy. Just pull on the old PCV valve straight out of the rubber grommet once itร•s out twist the hose off the other end and replace it with a new one.

User Avatar

PCV valve is connected to the valve cover, the one closer to the radiator. You can identify it by tracking a vacuum hose coming out of the cover.

User Avatar

sounds like too much oil pressure, try replacing the PCV valve


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.