That is incorporated with the latch assembly.
The cam sensor on a 1996 Mercury Villager cost about $35 to $40. The sensor is actually manufactured by a Nissan subsidiary.
The Vehicle Speed Sensor on the 1996 Mercury Villager is located on the back of the transmission (as you look at the vehicle from the front) on top of the transmission with a pair of wires leading away from it... best to reach it from under the vehicle.
The indicator was not or cant be reset.
They are mostly identical, yes.
5W-30 is the preferred oil ( according to the 1996 Mercury Villager Owner Guide )
where do i fill transmission fluid for a 95 mercury villager
Yes, exactly the same.
How do you remove the driver s seat from a1997 mercury villager
Go look at the answer that was posted for, "How do I put freon in a 1996 mercury villager?" This answer is most likely what you are looking for.
There are two sensors, one in the exhaust pipe at the front of the vehicle, one after the second converter under the passenger seat area.
There are two, one is in the exhaust near the front of the engine, the other is in the exhaust pipe under the passenger seat area.
According to one of Fords websites : For the 3.0 liter V6 engine in a 1996 Mercury Villager : The spark plugs are gapped at ( .034 inch )
To the right of the steering column under the dash.
4F20E four speed automatic.
Auto transmission fluid.
The 1996 Mercury Villager modulator valve can be found on the firewall in the engine compartment. The modulator valve will be on the passenger side of the firewall.
On a Mercury Villager , V6 engine : firewall 1-----3-----5 2-----4-----6 front of vehicle > driver
How can i disable alarm activated on 1996 mercury villager Horn and location this part please http://wiki.answers.com/Q/How_do_you_disable_factory_alarm_activated_on_1996_mercury_villager_Horn_headlight_are_blinking_continously.#ixzz23wWah0l5
The speedometer is electric, there is no cable. There is a speed sensor on the transmission that sends a signal to the PCM, which in turn sends a signal to the instrument cluster to display speed.
It is my understanding that Villager engine are non-interference.
After looking at the ( 1996 , 1999 , and 2002 ) Mercury Villager Owner Guides : The fuel tank capacity is ( 20.0 U.S. gallons / 75.7 liters )
Idle speed is set by the PCM and IS NOT ADJUSTABLE.
Regular fuel (87) is fine.
Under the dash on the right side.
would like to know where the speedometer sensors are on a 1999 villager
According to the 1996 Mercury Villager Owner Guide : With engine oil filter change : The 3.0 liter V6 engine takes : ( 4.2 U.S. quarts / 4.0 liters , 5W-30 preferred )
There's no need to change it if it's not broken.
You will need to begin by draining the oil from your 1996 Mercury Villager oil pan. Remove the oil pan. Remove the oil pump retaining bolts. Reverse the process to install the new oil pump.
A ( 1996 ) Mercury Villager has a ( 75.7 litre / 20.0 US. gallon tank )
The button is right below the seat ontrols
Shocks = $50 plus labor.
Open the drain plug on the passenger side of the radiator.
On the front of the engine, the thing with the spark plug wires attached to it.
Yes, 16 inch wheels were an option.
Under the dash to the right of the steering column.
Your 1996 Mercury Villager minivan with the 3.0 L - SOHC V6 engine is designed to use The Ford Motorcraft RT 1170 thermostat ( 190 degrees F / 88 degrees C )
The correct gap is .034. Hope that helps.
have vehicle scanned to determine problem
There is no transmission vacuum hose. That is a vent hose.
Flashers are next to the fuses in the fuse box under the dash.
As of August 20 , 2013 you can still view the 1996 Mercury Villager owners manual online at : www . motorcraft service . com ( no spaces ) Click on Owner Guides ( the fuse section starts on page 337 , it has the diagrams and lists )
The first model year of the Mercury Mountaineer was 1997
The Villager does not have a test port, you need to tee into the line near the fuel filter to test pressure.
I assume it is the same as the ( 1996 ) Mercury Villager : With engine oil filter change : ( 4.2 US. quarts of 5W-30 engine oil )
According to the ( 1996 ) Mercury Villager Owner Guide : With engine oil filter change : The 3.0L V6 engine takes ( 4.2 U.S. quarts / 5W-30 PREFERRED )
About 18 inches behind the coolant tank that sits next to your battery.
take the gas tank out, it's inside. piece of cake.
With a spark plug socket and socket wrenches and extensions.
No, the PCM does based on the computer map and various inputs, including cam and crank position. A distributor pick up (cam sensor) will have an affect on injector timing.
I looked at the Mercury Villager Owner Guides from ( 1996 , 1999 , and 2002 ) With engine oil filter change : Each Owner Guide shows ( 4.2 U.S. quarts )