At the engine end of the top radiator hose.
The thermostat is located in the housing where the upper radiator hose connects to the engine.Remove the 2 bolts and remove the thermostat.
At the end of the top radiator hose in the housing under the throttle plate.
Drain the radiator down 1/2 way into a container. Remove the top radiator hose from the engine end. The housing is where the thermostat is located. Remove the 2 bolts and the housing. Remove the thermostat and clean the surfaces and install the thermostat.
It is at the engine end of the top radiator hose.The housing is the thermostat housing and the thermostat is located therein.
Thermostat housing diagram for a 2000 Pontiac grand am?
The thermostat is located in the thermostat housing at the engine end of the top radiator hose.
You can replace the thermostat on your 2010 Chevy Impala 3.5 by removing the water hose and the 3 bolts from the thermostat housing. The thermostat will come right out. Reverse the process to install the new thermostat.
picture of location of thermostat for 2000 chevorlet impala
The thermostat on at 3400 engine is located directly below your throttle body - one of the bolts that holds the thermostat housing will hit the exhaust crossover pipe on the way out - some of these cars had a slotted thermostat housing so you may not need to remove that bolt.
It is on the intake manifold near the thermostat housing.
Underneathe the thermostat housing (3.8 engine)
The 2000-2005 Chevrolet Impala only came with a 3.4 and 3.8 V6 (6 cylinder) engines. Are you sure that you don't have a Malibu instead? at the emd of the upper rad hose you will find the thermostat housing. Take the 2 bolts out and remove it. When reinstalling it make sure the spring on the thermostat goes toward the engine.