Thermostats

Where is the thermostat housing on a 2002 impala?

91011

Top Answer
User Avatar
Wiki User
Answered
2008-09-22 01:21:30
2008-09-22 01:21:30

Drain the radiator into a container. Remove the top radiator hose at the engine. Remove the 2 bolts holding the thermostat housing. Remove the thermostat and clean the surfaces. Install the new thermostat, housing,and bolts. Reinstall the top radiator hose and fill with coolant.

001
๐Ÿ˜‚
0
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Related Questions


It is on the intake manifold near the thermostat housing.


It is on the intake manifold near the thermostat housing.


It is located on the intake manifold near the thermostat housing.


Intake manifold, near the thermostat housing. Should have two wires.


It is at the engine end of the top radiator hose.The housing is the thermostat housing and the thermostat is located therein.


The thermostat is located in the thermostat housing at the engine end of the top radiator hose.


At the engine end of the top radiator hose.


The 2002 Frontier thermostat is located in the thermostat housing. The housing is the connection for the top radiator hose.


You can replace the thermostat on your 2010 Chevy Impala 3.5 by removing the water hose and the 3 bolts from the thermostat housing. The thermostat will come right out. Reverse the process to install the new thermostat.


The 2002 Nissan Maxima thermostat can be found on the front of the engine in the thermostat housing. You can follow the bottom radiator hose directly to the thermostat housing.



The thermostat on your 2002 Dodge Grand Caravan 3.3 liter engine is located in the thermostat housing. The thermostat housing can be found on the front of the engine.


Underneathe the thermostat housing (3.8 engine)


The thermostat is located in the housing where the upper radiator hose connects to the engine.Remove the 2 bolts and remove the thermostat.


Drain the radiator down 1/2 way. At the engine end of the top radiator hose is the thermostat housing. Remove the housing and install a new thermostat.


To find the thermostat all you have to do is follow the top radiator hose back to where it connects onto the engine, that's your thermostat housing that it connects to and the thermostat is under the housing.


It is in the thermostat housing at the end of the top radiator hose on the engine side.


The thermostat is located in the housing where the top radiator hose connects to the engine. You will have to disconnect the hose and unbolt the housing to get to the thermostat.


It is at the engine end of the top radiator hose. Drain the radiator into a container and remove the hose at the thermostat housing. Remove the 2 bolts and remove the housing and the thermostat.


It is in the intake manifold at or near the thermostat housing. It will be 2 wires, one yellow and the other is black.


Drain the radiator in a container. Remove the top radiator hose from the engine. That is the thermostat housing. Remove the 2 bolts and the housing. Remove the thermostat and clean the surfaces where the housing mates to the intake. Install the new thermostat and housing with the 2 bolts. Reinstall the upper hose and refill the radiator.


The thermostat is located in the housing and the engine end of the top radiator hose. Remove the 2 bolts and replace the thermostat.


Just follow the top radiator hose to the stat housing, inside the housing is your thermostat...


There is a bleed screw on the thermostat housing. Remove the screw with the engine loose. Ounc you have pure coolant and no air you can close off the bleed screw.


The thermostat is located in the housing at the engine end of the top radiator hose.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.