Ford Ranger
Ford Ranger XLT

Where is the thermostat located on a 1995 Ford Ranger?


Top Answer
User Avatar
Wiki User
Answered 2006-02-20 02:27:04

Follow the top radiator hose down to the water outlet; this is where your stat is located. Mark It is located within the water outlet which is attached to the top radiator hose on the lower end. Mark


Your Answer

Related Questions

On a 1995 Ford Ranger : I know on the 4.0 liter EFI engine , you follow the top radiator hose from the radiator . It connects to a metal pipe which is part of the engine cooling thermostat housing that is bolted to the front of the engine . The thermostat is inside the housing

There is supposed to be an engine thermostat . Do you mean that someone has removed the engine thermostat ? What year of Ford Ranger and what year ?

follow the top radiator hose to the engine, the thermostat is located in the housing that that end of the hose is connected to

On a 1995 Ford Ranger : The heater blower motor is in the ENGINE COMPARTMENT , near the firewall , on the passenger side of the engine

follow the top radiator hose to the engine, remove it then remove the thermostat housing, remove the thermostat and replace it

follow the top radiator hose to the motor the hose is clamped to the thermostat housing remove the housing and you will find your thermostat

The fuel pump relay for the 1995 ford ranger 2,3 is located under the hood. It is in the power distribution box.

Where is the water temperature sender 1995 ford ranger 2.3?In: Ford [ranger]

The 1995 Ford Ranger ignition module can be found on the firewall in the engine compartment. The ignition module will be on the drivers side of the firewall.

On a 1995 Ford Ranger : The ODOMETER is near the center of your speedometer

The thermostat is done it has to be replaced.......

The 1992 Ford Ranger 4.0 liter had a 197 * Fahrenheit thermostat from the factory

On a 1995 Ford Ranger # 17 fuse is for the cigarette lighter.

where is the thermostat located on a 1989 ford tempo

The thermostat on a 1984 ranger is located in the lower radiator hose housing connected to the engine, not the top like most vehicles..Fairly easy to replace. Just remove the bolts.. then the housing and the thermostat.

do you have to remove fan shroud to access thermostat housing on a 1997 2.3L ford ranger

There are 3 plugs on each side of the engine.

Follow the upper radiator hose to the engine. It's in the housing on the engine.

drl module location on a ford ranger 1995

A 1995 Ford Ranger has shock absorbers on the front and rear

The 1995 Ford Ranger 3.0 liter engine PCV valve can be found on the top of the engine. The PCV valve will be on the back side of the air cleaner.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.