do you have to remove fan shroud to access thermostat housing on a 1997 2.3L ford ranger
I need a picture diagram for a 1997 Ford Ranger engine so I can locate where the thermostat is? Please help!!!
The 1997 Ford Ranger engines are fuel injected , so no carburetor
locate the top radiator hose and follow it to the motor, unbolt the housing it is connected to and remove the old thermostat replace it and put it back together
Remove the 2 bolts at the thermostat housing. The upper hose goes to the thermostat housing.
The bleeder valve for the brakes on a 1997 Ford Ranger is located in the brake line where it meets the brake disc. The wheel will have to be removed to access the bleeder screw for drum brakes.
is in side of the rear main fiuse box
The thermostat on a 1997 Ford F-250 is located under the upper hose assembly in the radiator. To locate the thermostat, drain the radiator halfway and remove the hose at the top of the radiator.
follow the top radiator hose to the engine, the thermostat is located in the housing that that end of the hose is connected to
In a 1997 Ford Ranger, the wiper control module is located behind the radio compartment. It sits on the left side of the compartment.
The thermostat is located underneath the radiator hose where it connects to the engine. The thermostat regulates the engine's temperature.
The 1997 Ford Ranger ECM computer is located behind the dashboard. The computer will be on the passenger side of the passenger compartment.
egr valve location on a 1997 ford ranger 23l
follow the top radiator hose to the engine, remove it then remove the thermostat housing, remove the thermostat and replace it
There is supposed to be an engine thermostat . Do you mean that someone has removed the engine thermostat ? What year of Ford Ranger and what year ?
the thermostat is located on the front side of the intake manifold easy to get at
My 97 4.0 Ranger's thermostat is in the front of the engine. I has two bolts you have to take off. I had to replace the gasket. Leaked when I got on it hard. It's called the "thermostat housing. Thermostat is easy to replace. Great engine.
this site^ will show you a how
The 97 Ford Explorer thermostat is located inside of the engine inlet. The inlet is where the top radiator hose connects to the engine.
A 1997 Ford Ranger
the dipstick is located between the brake master cylinder and the valve cover.
Should be less than/around $10.00.
On a 1997 Ford Ranger , 4.0 EFI engine : The PCV valve is on the top of the drivers side engine valve cover , near the rear
yes if the motors are the same.
The thermostat on a 1984 ranger is located in the lower radiator hose housing connected to the engine, not the top like most vehicles..Fairly easy to replace. Just remove the bolts.. then the housing and the thermostat.