On my Dad's 1992 XLT Ranger I just followed the upper radiator hose to the enginge. It is the 2.3 Liter. It is on the front of the engine. My 1978 Chevy 350 it is also found by following the upper to the top of the block. Start there or cheat & go to parts store when buying the new one & ask. Sometimes they will help out. In the Haynes Ford Ranger repair manual, it gives two locations, both located by following the upper radiator hose as noted above. On the 4 cylinder engine, it's located on the front of the engine block. On the 6 cylinder engine, it's located near the front of the intake manifold.
Should be less than/around $10.00.
My Ford Ranger is a 1998 4.0 ltr V6.
is in side of the rear main fiuse box
There is supposed to be an engine thermostat . Do you mean that someone has removed the engine thermostat ? What year of Ford Ranger and what year ?
follow the top radiator hose to the engine, the thermostat is located in the housing that that end of the hose is connected to
Follow the top radiator hose from the radiator , it connects to a metal pipe which is part of the thermostat housing that is bolted to the front of the engine The thermostat is inside the thermostat housing
follow the top radiator hose to the engine, remove it then remove the thermostat housing, remove the thermostat and replace it
follow the top radiator hose to the motor the hose is clamped to the thermostat housing remove the housing and you will find your thermostat
Follow the upper radiator hose to the outlet/sensor housing then to the head. Remove the 2 bolts on holding the housing to access it.
yes if the motors are the same.
The thermostat is done it has to be replaced.......
What is the timing for a 1998 ford ranger 2.5l
The 1992 Ford Ranger 4.0 liter had a 197 * Fahrenheit thermostat from the factory
On a 1995 Ford Ranger : I know on the 4.0 liter EFI engine , you follow the top radiator hose from the radiator . It connects to a metal pipe which is part of the engine cooling thermostat housing that is bolted to the front of the engine . The thermostat is inside the housing
You can disarm your 1998 Ford Ranger antitheft system by removing the antitheft system fuse. The fuse is located in the fuse box.
The 1998 Ford Ranger speed sensor ring can be located on the passenger wheel. The speed sensor ring will be on the inside of the brake rotor.
where is the thermostat located on a 1989 ford tempo
The thermostat on a 1984 ranger is located in the lower radiator hose housing connected to the engine, not the top like most vehicles..Fairly easy to replace. Just remove the bolts.. then the housing and the thermostat.
do you have to remove fan shroud to access thermostat housing on a 1997 2.3L ford ranger
Follow the upper radiator hose to the engine. It's in the housing on the engine.
On a 1998 Ford Ranger : The evaporator core for the air conditioning system is inside the plastic case ( that also holds the heater core ) located behind and below the glove compartment in the dash on the passenger side
what is the axle gear ratio for a 1998 ford ranger 4x4 4.0l?
No, the cab was lengthened in the 1998 model year.
need locations of steering column brackets on a 1998 ford ranger