At the engine end of the upper rad hose. when replacing it make sure the spring goes toward the engine. You can check you old one by putting it in a pan of hot water on the stove with a thermometer and watch if it pops open at the correct rated temperature. Might save you some money if it's working properly.
Are you sure you mean 2002 Chrysler Cirrus -- they quit making the Cirrus in 2000. It is now a Sebring
A 2000 Chrysler Cirrus does not have a cabin filter.
The Chrysler Cirrus was only built from 1995-2000. The radiator cap is located on the housing where the upper radiator hose hooks to the engine.
No. A 2000 Chrysler does not have a reset.
diagram showing where the thermostat is located
Front of engine, behind the engine mount bracket.
the thermostat is located in the lower front area... under the engine in another words
check the size of the engine, if it is the same it will fit
no it's located in the tank
It is on the side of the fuel tank. You have to lower the tank to access.
I have a 2000 Chrysler cirrus it only blows cold air on the heat cycle. can someone help me as to why this is happening?
There is no such part on a Chrysler.
gasoline, regular unleaded.
It does not have one.
The firing order for a 2000 Chrysler Cirrus is 1-2-3-4-5-6. Click the link for a diagram of the connections.
No. Chrysler does not have reset switches on the fuel system.
Chrysler does not have inertia or reset switches.
It is located under the housing at the engine end of the lower radiator hose.
It is called a bypass hose