Where The Top Radiator Hose Clamps Onto The Engine. Where It Clamps On Is Called A Thermostat Housing. Drain The Coolant Down Some From The Radiator. Remove The Top Hose End From The Thermostat Housing. Remove The Housing From Manifold, Remove Thermostat Install In Reverse Order. Be Sure To Install Thermostat In The Correct Direction & Be Careful That It Fits In The Groove In The Housing Or You Can Crack The Housing. Add The Coolant You Took Out And Get A Bottle Of ( water pump lubricant & rust inhibator) Small Plastic Bottle . Good Luck
where do i find the thermostat for 99 cavalier
All the O2 sensors on a 99 Chevy Silverado with a 5.3 engine are located in the exhaust. The are positioned on each side of the exhaust manifolds and just after the crossover.
the thermostat is in the coolant cap
It is behind the starter. you can not see or get to it until you remove the starter.
It is on the bottom rear passenger side of the engine. You will have to lay under the truck to see it.
The thermostat for a 1999 Chevy Camaro V6 engine can be found under the hood. It is in the right side of the engine, under the throttle sensor.
NO.
yes
The thermostat on a 1999 Chevy Monte Carlo with a 3.1 is located just below the throttle body. It is covered by the top radiator hose attached at that location.
where is knock sensor located on a 99 Silverado 1500 4.3
Yes they will as long as the 99 is not the new body style.
I have 1999 chevy Silverado z71 wanting to see if a 1994-95 chevy Silverado z71 bed will fit