Find the drivebelts, then remove them. Remove the right front wheel and inner fender liner. Remove the idler pulley and bracket assembley, remove the water pump too, once you do that you should see the cover to the timing belt. But then you need to remove a few more things before you can get to the timing belt, but you need to get a manaul for your car and then it will explain as to how to do this.Most parts store sells a repair manual for your car and they are around $20.00. As each engine size is different. But this answer will give you an idea...
The 1994 Mercury Topaz has a chain and not a belt.
Your 1991 Mercury Topaz 2.3 liter has a timing CHAIN
The timing belt is inside the timing cover.
The 2.3 liter 4 cylinder and the 3.0 liter V6 have a timing CHAIN
the pump is timing belt driven and is located under the timing belt cover recommend replacing the timing belt at the same time.
On a 1993 Mercury Topaz : Both the 2.3 litre four cylinder engine and the 3.0 litre V6 engine use a timing CHAIN
timing belt 98 mercury villager timing belt 98 mercury villager
on the front of the motor, it will have the sepentine belt around it I am working on my wifes' 1996 mercury mystique and the alternator is located behind the timing belt. If you are standing directly in front of your vehicle the timing belt is located to the left side of the motor and the alternator is located directly behind the timing belt.
It is under the timing cover, driven by the timing belt.
when should i change the timing belt on a mercury villager
Is it safe to drive my 2000 Mercury Mystique with a bad timing belt?
when the belt has no slack in it
The 4 cylinder has a timing belt
It does not have a timing belt. It has a timing chain.It does not have a timing belt. It has a timing chain.
The 3.0 litre V6 engine in a 1998 Mercury Villager has a timing BELT
The timing belt is located inside the timing belt cover at the fron of the engine.
There is no way to 'test' a timing belt. On your 1993, Mercury suggests it be replaced every 64K miles.
how to set timing belt on a 98 mercury tracer 2.0
not for changing the belt. however you will need it for the ignition timing once you have replaced the timing belt
There is NO TIMING BELT on a 1995 Mercury Sable * Both the 3.0 and the 3.8 liter V6 engines in a 1995 Mercury Sable have a timing CHAIN
The engine in the Mercury Villager does not use a timing chain, it uses a timing belt. The recommended belt replacement interval is 105,000 miles.
You match the timing marks on the sprockets with the marks on the belt...exactly.
There is no Timing Belt. It has a Timing Chain ,, inside the Engine.
The 1998 Mercury Villager 3.0 liter V6 engine has a timing BELT ( according to the Gates website , they make timing belts etc. )
The timing belt for a 1996 Honda is on the front of the engine. It is located behind the timing cover.