behind the bumper near the back seat
The expansion valve on a 1997 Honda Accord AC is located in line with the tube that supplies liquid coolant to the air conditioner vapor. It is mounted right beside the tube.
Put it in the radiator but also make sure the overflow tank is full. Follow the overflow tube from the radiator and you will find the tank.
There is no orifice tube on that car. It uses an expansion valve located in the evaporator case under the dash on the passenger side.
The dipstick for the 2004 Honda Accord is located beside of the battery. A funnel is needed to reach the tube to add fluid.
in the fuel tank just drop the tank down and it is located just on top.Answerin the fuel tank just drop the tank down and it is located just on top. AnswerIt is located in the fuel tank which is located in front of the trunk... You can see it by crawling under the car. You can see it in the rear of the tank. You must remove the tank to access it. The filler tube just pulls out. I had to remove the gas filler door, to remove the filler tube.. If you can get the car up high enough you should be able to remove the filler tube without removing the little door..
After the exhaust manifold but before the catalytic converter on the exhaust tube.
How do you remove a water tube from a Honda accord 91 ex
It's in the gas tank at the suction tube for the fuel pump, which is also in the fuel tank.
You fill the radiator through the overflow tank.
The 1999 Honda Accord air conditioning drain to can be located on the bottom of the air conditioner compressor. The drain to allows condensation to drain on the ground below the engine.
How do you replace spart plug tube seal of Honda accord LX 1994?
I it is a manual transmission it has no dipstick. If it is A/T it is located on the front of the transmission near the engine block. It is very small and has no tube. Look carefully.