it is one of the accessories driven by the engine crankshaft --the alternator, the A/c compressor, the Power Steering pump and the hardest one to get to is the water pump. on my 626 it is on the same belt as the alternator.
where is the water pump located in Mazda millenia
Replacing the 1997 Mazda water pump will cost approximately $300. The water pump will cost about $75 and will require four hours of labor.
No
i need a timing belt water pump and the sensor for a mazda 1994 6 cylinder 3.0 motor how much those 3 pieces cost
you do nothing
u
The water pump from Mazda 626 is the same, all part from Mazda 626 work very good in the Kia Credos and Clarus.
In order to remove the water pump on a 2000 Mazda Millennia, you must first remove the timing belt and the pulley for the water pump. Remove the pump itself by detaching the four bolts that are securing it. Next, replace any gaskets, install the new pump, then the pulley, and then the timing belt.
The 1999 monster 626 water pump is located on the front of the engine. You can follow the top radiator hose directly to the water pump.
The water pump is located behind the timing belt cover and is driven by the timing belt. You need to reove it to gain access to the water pump.
The water pump is under the timing belt cover. To access the water pump, you must first remove both belts, the water pump pully, and the timing belt cover.
To change the water pump on a 1996 Mazda 626 you have to follow a few step. First you disconnect the miscombobulater from the alternator valve. Then you take the water pump off and put the new one on. Lastly you re -attach the miscombobulator and the altornator valve. There you have it.