Pontiac PVC Valve is located on the Driver's side rear valve cover.
on the valve cover
I changed mine on 1996 stratus 2.4l 4cylinder it is underneath on right side and has a rubber hard cover on it .
It is located behind the timing chain cover under the exhaust manifold.
They are located inside the glove box on the left side, under a cover.
it is under the engine cover behind the exhaust manifold
driver side of the front valve cover if its the V6 if its the 4 cyl. its on the top of the valve cover somewhere
located about 12 inches right of oil fill cap.attached to front valve cover.
on the crank behind the front cover
Behind the timing belt cover just below the cam
on top of the engine underneath the cover. you cant miss it.
The water pump is located on inside of the timing cover. It is driven by the timing chain.
The PCV valve on a 2002 Pontiac Bonneville is located on the back of the in take manifold, however to get to the PCV valve you will need to remove the valve cover.
behind timing cover on front of engine if its a 2.0 ltr ohc
The 1995 Pontiac Grand Am 3.1 liter engine crank shaft sensor is located inside of the rear engine cover. You will need to remove the rear engine cover in order to access the crankshaft sensor.
The fuse box diagram, for your 1995 Pontiac, can be found on the inside cover of the fuse box. The fuse box can be located in the engine compartment.
It is at the rear driver side of the valve cover. There is a hose leading from it to the Throttle Body.
above passenger feet. remove cover, reach as far forward as you can, you will see the connectors.
its underneath the steering wheel... you just need to remove the cover and its right there
It is under the hood in the main power distribution box. The schematic is on the underside of the cover.
the sparks plugs are under the cover on top of the engine
Right next to the driver's side wheel. You have to remove the transmission side cover.
It is located in the fuse panel on the drivers side of the dash. Open the drivers door to see the cover of the fuse panel.
Follow the large hose on the top right of the radiator back under the plastic engine cover. Thermostat is inside the metal cover at the end of the hose. Remove cover with 10mm socket.
The sensor is located on the right side of the the crankshaft attached by 2 bolts thru the timing cover it will be hard to see due to the pulley.