Where to buy Motorola ml900 hard drive
The hard drive should be on the bottom connector and all you other drives on the top connectors. Thats how mines connected!!!!!!!! :-)
It connects the drive to the system power supply.
An IDE connector is used to connect a CD-ROM drive or hard drive to a motherboard, with a long and flat ribbon cable.
The SATA connector cable, or whatever connector cable you have from the drive to the motherboard.
what connector connects to the Intel p65 express
yes adjust the jumper at the back of the drive. it's a white block. it between the interface connector and power connector. you also want to set it aswell in the bios.
There are three.1. IDE2. Sata3. SCSI
You could format two hard drives at same time but both need to be connected by the sata connector cable.
Some of them do. Your CD-ROM and hard drive can have molex power connector, or/and SATA power connecter. I think SCSI interface uses molex power connectors too.
hard drive.
A PATA connector
An IDE connector is used to connect a CD-ROM drive or hard drive to a motherboard, with a long and flat ribbon cable.