Where would one find a diagram of a 1999 Grand Am SE exhaust system?
walkerexhaust.com has a parts locator that allows you to put in the year, make and model of a car and it shows a diagram of the exhaust system including Walker part numbers for everything you would need including clamps and gaskets. Start at http://www.walkerexhaust.com/catalog/vehicletypescrnexhaust.asp
That is condensation due to the exhaust system being cold and the heat from the engine makes the exhaust system / pipes sweat. As the exhaust system heats up then that will stop. Now you said WATER not antifreeze. If you had engine coolant running out of the exhaust then it would be the color of the antifreeze and it would be steaming WHITE and then you would have an engine problem, MAYJOR. You said…
In a 2000 grand am SE what other reason would there be for exhaust fumes to come into the car if the muffler is ok?
I have the same problem in my 2000 grand am! Have had it in the shop three times and they can not find the problem either. Exhaust system is tight, replced manifold gasket, still fumes. seems to be worse when cold is cold, after stopping from a drive, can smell on drivers side under the hood??? Help!
How many oxygen sensors are on a 1994 ford Explorer and where are they located also with a diagram or accurate pictures?
Would a 1997 Camry with a 5S-FE engine exhaust system work with a 1993 Toyota Celica with a 5S-FE Engine?
On a 1997 Mercury Grand Marquis : Bank 2 is the drivers side of the engine and ------------------------------------------------------------------------------------------ Sensor 1 would be close to the engine before the exhaust enters the catalytic converter Sensor 2 would be AFTER the exhaust has passed through the catalytic converter ( also called a catalyst monitor )
Yes. You can. But there would be no point in an exhaust system after this modification. It would actually be in your disfavor to do this. Sure, it's louder. But you would then risk burning the gaskets and also Reduce your horsepower. Only do this temporary. But you should think about buying new headers (manifold) if they are damaged.
Some (front wheel drive) cars have a flexible piece of pipe that connects the exhaust manifold to rest of the exhaust system. The length of pipe is designed to allow the engine to rock back and forth on its mounts. Without the flex joint, the movement of the engine would damage the rest of the exhaust system.
No. There really isn't going to be any variance between that system and that on other vehicles. It'll be a Fixed Orifice Tube system, and any diagram would be basic, and would look exactly the same for a Ford or any other make of vehicle with such an AC system. If you're looking for relays and electronic schematics related to your AC system, what you'd need is a wiring diagram.
On a 1987 Honda Accord is the exhaust manifold in the front facing the radiator or underneath the car?
asuming the vehicle has a 4 cylinder, the exhaust manifold would be facing the radiator. 6 cyl. would also have one facing the firewall. You can figure it out simply by tracing your exhaust system from back to front. tail pipe - muffler - exhaust pipe - catalytic converter - exhaust pipe - exhaust manifold - engine.
S-10's have various troubles that make them 'sound loud.' Typically the exhaust system is the culprit. Pollution control systems such as the EGR or AIR pump are prone to leaking causing loud exhaust noises the intensify when the engine revs. Additionally, the timing belt is very noisy in truck that have more than 75,000 miles. I would first check the exhaust system including the emmissions systems that are connected to the exhaust system.
How is the wiring diagram for disconnecting an outlet and a exhaust fan when a Fire Suppression System is activated?
My brother has a Restaurant and days ago, he upgraded the Fire Suppression System (also named Ansul System). So the ansul, has only a microswitch that has only 3 leads (two contacts, one "nc" and "no"). Now, how is the diagram to interconnect this microswitch with othe elements (electrical) to disconnect one outlet that is located under the hood plus the fan, as per code here in the city? The guy who install the Ansul…
An ER diagram is an "Entity Relationship" diagram, which illustrates the relationships between the entities in a data model. A data model for a timetable management system might have entities like Days, Periods and Rooms. Its ER Diagram would then show that a Day is broken down into multiple Periods, and each Room might be used for multiple Periods.
It measures the amount of oxygen in the exhaust stream. The computer uses that info to adjust the amount and timing of the fuel injection system to achieve the best emissions, power, and fuel economy. It measures the amount of oxygen in the exhaust stream. The computer uses that info to adjust the amount and timing of the fuel injection system to achieve the best emissions, power, and fuel economy.