there are 2 available protocols used to encapsulate data traffic over a trunk link on a Cisco switch
1. 802.1q is proprietary works only between 2 cisco switches
2. ISL is open standard works with any switch..
The answer is 'Trunking'. The definition of trunking is = The aggregation of multiple logical connections on one physical connection between connectivity devices. In the case of VLANS, trunking allows data from multiple VLANS to share interface on a switch. Network + Guide To Networks Review Question Chapter 6 #18
SIP Trunking (Session Initiated Protocol) services for any PBX system, with coverage coast to coast across Canada. Switch to IXICA and save big on your communication cost. 100% Canadian service provider.
since the first desire of desirable mode is to trunk,so the switch port mode will be trunking since the first desire of desirable mode is to trunk,so the switch port mode will be trunking
VLAN
Trunking
A Dynamic Trunking Protocol switch in a dot matrix printer is used to change the parameters that the printer is operating under. These might be the baud rate of the printer, or the parity for data checking, or even the font size.
Tandem Trunk is a trunk circuit which connects a tandem switch to another tandem switch or to a telephone company central office.
disconnect and reconnect the switch
The frames are assigned to the native VLAN.
yes switch work on ip address.
Multi Protocol Link Switch
VLANs provide the capability so virtually segregate traffic on a network. VLANs work by tagging traffic packets and ensuring that packets with separate VLAN IDs are only available at ports which have been configured for that VLAN ID.