0
Is pea gravel or three-quarter rock a better material to use for a concrete pool coping?
Wiki User
∙ 16y ago
Loose gravel of any size is not a good idea. You would be cleaning it out of the pool daily. And you don't want to vac them out. Loose stones would be a safety factor. Lost footing, slippery, prone to collect mud, sticks or twigs or anything that drops into them. You wouldn't want to step on anything protruding up from the rocks. How would you keep the area clean? I am probably forgetting an arm load of reasons not to use gravel.
Ah, yes. Twisted ankles from slipping on wet stones. Not to mention tender feet.
k
Jeezzz, are you building or making your own coping??? Not woo swift. heh
Wiki User
∙ 16y ago
Wiki User
∙ 13y agoConcrete can be very slippery unless you have a slip resistant finish. It can also be very hot on bare feet in high summer temperatures. Cool deck is a much better alternative as it is porous and allows the heat to disperse. It is also slip resistant.
Wiki User
∙ 15y agoBrick paver's will look better for longer and they are easier to clean up later on when they get older.
American Custom Conc...
Wiki User
∙ 16y agoPea gravel can be harsh on the feet at times. Recomend Concrete w/ broom finish.
Add your answer:
Earn +20 pts
Can concrete coping be stained?
Staining concrete coping is extremely common. Stain is available in a wide variety of colors and lasts for a long time due to the porous nature of concrete.
Is it possible to replace pool coping?
Yes, it is possible to replace pool coping. Pool coping is the material that covers the top edge of the pool structure and serves both functional and aesthetic purposes. Over time, coping may deteriorate, become damaged, or simply need an update to improve the pool's appearance or functionality. Here are the basic steps involved in replacing pool coping: Assessment: Begin by assessing the condition of the existing pool coping. Determine if it can be repaired or if a complete replacement is necessary. Choose New Coping Material: Select the new coping material that suits your preferences and budget. Common pool coping materials include natural stone, concrete, brick, and pavers. Ensure that the chosen material is appropriate for pool use and complements your pool's design. Remove Existing Coping: If replacement is required, carefully remove the old coping material. This may involve using tools such as a chisel or a jackhammer to break up and remove the old coping. Prepare the Substrate: Ensure that the pool's edge and surrounding area are properly prepared. This may involve leveling the substrate, repairing any damage, and creating a smooth, stable surface for the new coping. Install New Coping: Lay the new coping material in place, starting from one end and working your way around the pool. Use mortar or adhesive appropriate for the chosen material to secure the coping in position. Grout and Seal: Once the coping is in place, grout the joints between the coping pieces to create a seamless appearance. Seal the coping to protect it from water, UV rays, and other environmental factors. Finish and Clean: After the grout and sealant have set, clean the pool coping and the surrounding area thoroughly. Ensure that the pool is ready for use. It's essential to hire a professional with experience in pool coping installation if you're not confident in your ability to complete the job correctly. Proper installation is crucial for the safety, longevity, and appearance of your pool coping.
How thick should the copping be for pools?
The thickness of coping is dependendent on the type of material used and the amount of any overhang. Typically a cast-in-place coping is 3" with about an inch of overhange.
Can you replace coping on vinyl liner pool with stone?
Afraid not. Vinyl liner pools are built using "concrete receptor coping" into which the deck is poured. It also contains the "bead receptor" that the vinyl liner attaches to. Actually YES it can. You would want to do this during a liner replacement but it can be done. You would have to remove the concrete from around the perimeter of the pool, remove/ replace the "concrete receptor coping" with bead receiver, aluminum extrusion, form/pour a bond beam, then lay your stone. Not really an easy do it yourself job but it can be done.
Can you put the new liner on top of the old one?
The answer is no. Vinyl liner pools and the concrete deck around the pool are constructed with "concrete receptor coping". The concrete deck is poured into the receptor coping which at the very bottom has was is called a "bead receptor". The vinyl liner at the top has what we call a bead, used to install the liner into the bead receptor. Because there is, and can be, only one bead receptor, a second liner cannot be installed.
What is the caulking that goes around your pool coping?
I own a caulking company, we caulk over 200 pools a season in the mid atlantic. The caulking we use is a two part poly urathane caulk. You can use a one part polyurathane caulk as well it's just not as good. This joint is an expansion joint that seperates the coping from the deck (concrete, pavers, etc). When you use sertain caulking material in conjunction with their speciefied primer they are considered submersible.
Concerned about the gap between the concrete edge or trim of pool and the rest of the concrete flooring?
I assume the "gap" you refer to is the expansion joint between the coping and the concrete deck. The expansion joint is there to prevent damage from occurring in case of movement. There should be no reason for concern, unless you are replacing the deck.
What material do you use to createe a caulk joint against natural pool coping stone of 2 thickness and the concrete pool deck?
If there is no caulking joint there then you just don't "creat" one. If there is in fact a joint with old caulking it then yes you can remove 100% of the old stuff and use Deck-o-seal.
Where can you find inexpensive concrete forms for the coping on a kidney-shaped pool?
Go to: www.stegmeier.com/cant_regular.htm You can build forms with 1/2" 4x8 sheets plywood
What is better in a saltwater pool PVC or aluminum coping?
PVC won't get eaten like alum.
How do you remove aluminum inground pool coping?
Pool Copings is expected while an in-ground pool is being built. An adjusting material disengages the pool's edge or the shell wall from the incorporating surface area. Maybe of the best thing about adjusting is that it will in general be completely changed with a huge number, materials, and styles to oblige your style and monetary arrangement. Copings can be precast with straight lengths, corners, or bended segments. Most stones are made of permeable, grayish-white cement. Rather of Pool Copings stone, concrete or wood decking that loosens up to or fairly past the edge of some pool plans can be found. for more information visit on : buytilesandmore
Can the PVC coping be replaced with new PVC coping on an inground pool built in the mid 70's?
Pool coping can only be replaced by cutting the concrete at least a foot back from the coping and busting that section out. If it were me, I wouldn't replace it with PVC, I would go with aluminum. Because of this, a new liner will most likely be needed. My pool was built in '74. The liner needs to be replaced and the coping looks awful. I have been told by 2 pool repair men that the concrete will have to be "busted up" and also replaced. I was told "Liner Lock" is used to hold the new liner onto the old coping and it should last until the liner needs to be replaced again. So, I asked if there was something out there to cover the coping since it looked so bad. One of them says he will check into it for me but I have not heard back yet. I AM IN THE SAME SITUATION WITH A 30 YEAR OLOD POOL. I AM ONLY LOOKING TO PURCHASE THE 4 ALUMINUM CORNERS IF SOMEONE DECIDES TO GET RID OF THEM TO ADD NEWER COPING PLEASE CONTACT ME AT WGJ48@AOL.COM. THANKS, BILL
