You can view owners manuals ( which include the fuse box diagram ) back to 1996 at www . motorcraft service . com ( no spaces ) Click on Owner Guides
Check in your owners manual
go to a boneyard and check one out straight arrow
1Open the fuse panel cover on the driver's side foot well by pulling down on the cover with your fingers.2Locate the fuse for the electronic control unit. Use the fuse diagram on the underside of the fuse panel cover to locate the fuse.3Pull the fuse using the fuse pullers in the fuse panel.4Turn the ignition to the "on" position but do not crank the engine.5Wait five minutes and then reinsert the fuse into the fuse panel.6Wait for the "check engine" light to flash and then shut off. At this point, your check engine light will be reset.
You can reset the 2004 Honda Accord check engine light by removing the instrument light fuse. The location of the fuse can be found on the inside cover of the fuse box.
Look on the underside of the fuse box cover.
In the engine bay , on the right side there is a fuse box , take the cover off , and turn cover upside down to see which on is the EFI fuse , if im not mistaken its the second to last , a green 30
The easiest way to reset the 2001 Toyota check engine light is to remove the check engine light fuse. The fuse can be found in the fuse box.
Go to a junkyard and get the diagram off a vehicle like yours.
There is no individual fuse. The ECM has 2 or 3 fuses, and it controls the check engine light.There is no individual fuse. The ECM has 2 or 3 fuses, and it controls the check engine light.
look for a diagram online or get a haynes manual.
To reset the check engine light on a 1998 Honda Civic located the blue 15 amp fuse in the engine bay fuse box. The fuse is labeled ECU, and will reset the check engine light when removed.
There is o fuse for the check engine light. The check engine is controlled by the cars computer the only way to turn it off is to fix the problem that made it come on.