the same ones that mount the straight 6 being swapped
The FE 352 cid ford motor has the same external dimension as all FE motors. Pre-1965 blocks (332, 361, 390, 427) have the same motor mounts. After 1965 engines have a different mounting holes, some machining/drilling would be needed, or custom motor mounts.
yes but you will have to use motor plates to install it in place of motor mounts.
E-bay or craigslist Try Hemmings Motor News
The power of the engine and the maximum speed of the 1965 Truck Dodge D-400 Motor Slant six 6cyl are 110 hp and 75 mph respectively.
The 1965 Lincoln was the last model year of the car to have the 430 cubic inch *engine* which develops 340 horsepower. The engine had been usd in Lincolns since 1958.
1 1/4 / 7/16-14
drain radiator and take radiator out, take bolts out of motor mounts, unbolt the tranny and torque converter from the flywheel, take the starter out, take all the wires off distriburetor, take fan blade off, take off alternator and power steering pump, remove the hood of the car, unhook the exhaust from the manifolds,put floor jack under the tranny and then your ready to pull the engine with your engine hoist.
The 1965 Chevrolet Corvette came standard with a big block engine. The motor was 396 cubic inches and was able to produce over 425 horsepower. The big block helped pave the way for future American muscle cars.
1965
327/275 and 300hp, 8 degrees btdc.
Engine Engine was created in 1965-05.
# 1 on the distributor cap faces AWAY from the engine