answersLogoWhite
Computer Networking
Windows XP
Windows 7

Which port is used by Ping command?


Top Answer
User Avatar
Wiki User
Answered 2016-02-02 05:23:52

The answer is none.

No ports required for Ping as it uses icmp packets.

It needs to allow icmp 'echo-request' (type 8) packets out and icmp 'echo-reply' (type 0) packets in.

If you need to check the availability of a port, you must use a different tool, such as Paping.
It doesnt use any port. Echo request is an ICMP message which is an internet Layer Protocol so it is sent as an IP datagram.

If you need to check the availability of a port, you must use a different tool, such as Paping.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Related Questions


The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.


PING command verifies the existence of a node on a network. Ping command is a command of command line interface . It is used to check if the host is alive or not.


The ping command is to check that an IP address is reachable. the ping command is used to know the active networks and ip address in the network. it also used to self check the address when there is connection trouble with other system. internet control message protocol is used by the ping.


The ping command is a troubleshooting command used both to verify network connectivity and estimate the "distance" between nodes.


A ping command is used to check whether the host is alive or not. A ping command is used when you want to check if the host can send or receive packets. The protocol that is responsible for Ping command is ICMP.


If you mean a Command Prompt Command then there are a few you can use. The most commonly used would be ping and tracert. But there are others including netstat which shows the port status.


Running the ping command with -n "count" is the number of echo request to send.


The ping 127.0.0.1 has host name Loopback, and is used to ping your server to verify software. On the command prompt, the technician would type, PING '127.0.0.1' or PING LOOPBACK.


PING is what you need to use . Ping 127.0.0.1


Ping is used to check the network card of a computer and its connection to the network.


Ping command is used to check the network connectivity. You can use ping command from windows shell only, not from DOS OS as DOS does not supports networking. You can use "-t" switch with ping for continuously network checking.Syntax: Ping Example: ping 192.168.1.15 or ping 192.168.1.15 -t or ping -t 192.168.1.15


you use the ping command in the start menu under the run command.


At the command prompt, the command is "Ping (server name or ip)" [enter] Ping 192.168.1.1 Ping wikianswers.com


you can use the ping command. the syntax is open DOS and then type ping ipaddress of the host machine


The trace route command is used to ping a multi-function device.


Use the PING command to find this out. In Windows, open a command window, and type:ping tagged.com(assuming this is the correct domain name).Use the PING command to find this out. In Windows, open a command window, and type:ping tagged.com(assuming this is the correct domain name).Use the PING command to find this out. In Windows, open a command window, and type:ping tagged.com(assuming this is the correct domain name).Use the PING command to find this out. In Windows, open a command window, and type:ping tagged.com(assuming this is the correct domain name).


Ping is the simplest command to see if your internet connection is working



TCP/ IP stands for transmission control protocol / Internet protocol suite. Ping is a command of command line interface . -t in TCP IP ping means to repeat the ping command continuously.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.


The ping command sends a small amount of data to a certain site or ip adress, and checks for a response. It is used to check the speed of a connecion or the reliability of a network.


to check if your Ethernet card r INTERNET is working r not, just type the following in command prompt: ping 127.0.0.1 This command is basically used for self test of NIC(Network Interface card) card


in command prompt ping -L 600 "internet address"


ping -a <ip-address> Example ping -a 192.168.0.1





Copyright ยฉ 2021 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.