There are two cables that connect to the floppy drive in a desktop computer.
The small cable with four wires is called a Berg connector. It is used to provide power to the floppy drive. The larger, flat cable is the data cable.
The two cables that connect to the hard disk are the power cable and the data cable.
a floppy data cable to connect a cable from the 20-pin ATX power connector socket on the motherboard to the Berg power connector on the FDDt the FDD to the motherboard
You need two cables called IDE cables. Typically these cables have the ability to connect two hard drives or two CD DVD roms. So just find two IDE cables and you can conect what you need to connect.
how do connect two hard driver
To add a new hard disk: 1) Buy a disk of a type that your diskcontroller supports 2) Shut off your computer 3) Open the computer housing and locate the cables needed to connect you hard disk (there may be two, one for power and one for data if it isn't a SATA2 disk which only needs one connector) 4) Mount the new hard disk in your computer with appropriate fasteners (screws...) 5) Connect the cable(s) required 6) Put your compter together again 7) Turn on your computer 8) Depending on your operating system and the hard disk newly installed you may not have to do anything or you may have to partition and name it befor you can use the new disk
Typically EIDE cables connect to IDE Hard-drives and optical drives such as CD and DVD Drives. The cable connects between the motherboard of the computer and the hard-drive or optical drive. Normally most motherboards have two idea buses. You can have to drives per cable. So a total of 4 drives.
Yes, there are two PATA connectors available on the motherboard, so you can connect PATA hard disk through this motherboard.
There are two types of Hard disk. 1:Sea gate disk 2:SATA Hard disk
there are two types of partitions in the hard disk is primary and logical.
Yes, you can. If your computer has more sata ports you can use then to connect more hard drives.
You would connect the two devices by using the cables provided. Should no cables be available then check what type of connections are available on the Kindle and on the computer. Consult your local computer shop for the correct cables.
It depends on your motherboard. You'll need to refer to your motherboard specifications to find out how many (and of what type) hard disks you will be able to connect internally.
generally one but sometimes you can get two
i assume the two red cables are for the positive and the black one single for the negative