A battery cable is a too basic thing to qualify as an invention.
But sure, there had to be a first person to use one - which in all probability is the same person who invented the battery.
After all, a battery isn't to any use unless you connect it to something, and to do that, you'd need battery cables.
Probably the same guy who first stuck a battery in a car. A battery by itself isn't any use, you need to hook it up to something, and that's when you need cables.
You can purchase battery cables online for a low price. A good place to find these is at discount marine supplies. They carry battery cables and are discounted, too.
Disconnect the Regal battery cables. Find the battery clamp then remove it. Lift the battery out, then put the new one in. install the clamp, then connect the battery cables.
disconnect the battery cables. find the battery clamp and remove it. Lift the battery out, then set then new one in place. Install the clamp, then connect the battery cables.
When using battery cables to start a car, once it has started is there a procedure when removing the cables from the running car?
THe battery is under the back seat so you have to TAke all theose cables out
Take both cables off. Remove old battery. Put new battery in. Put cables back on.
Just connect the battery to the motorcycle battery cables with jumper cables and then start it.
The battery on a Toyota Yaris is changed by lifting the hood, loosening the battery cables, and placing them to the side. A new battery is put in place and the cables reconnected.
Remove cables from battery Remove + cable from the starter solenoid Remove the - battery cable from engine ground install new cables using the same routings as original
Take the cables off of the battery. Remove the battery hold down clamp and lift the battery out. Set the new battery in, reinstall the holddown, then connect the cables back.
To replace the battery on a 1979 Corvette, disconnect the battery cables using the proper tool. Remove the bar that holds the battery in place and pull out the battery. Place the new battery in and reconnect the cables.