Why are both brake and abs lights are on?
ABS system is inoperable and there is something wrong with the non-ABS part of your brake system.
Why are both the abs brake lights on when the brakes work the same as they did before the lights came on?
The ABS and brake lights sole purpose is to signal you that you may have a problem with each / or one individual system. From your question we can assume that your ABS and brake lights come on continuously. There by we can safely deduce that you may have a problem with your ABS system and / or your brakes.
What does it mean when the emergency brake light and the abs light come on the dashboard at the same time in a 2005 Mazda 3?
The brake lights are NOT fused seperately, which is why it will not tell you in the handbook. The brake lights will be fused through the ABS circuit. However, if you are looking for this information i assume none of your brake lights are working. If one brake light is out it will be the bulb, look back through this section a few weeks to find out how to remove the rear light cluster. If…
Check to see if all the wires are connected at the abs sensors especially at the rear wheels ---- Sounds pretty weird, but a typical brake job does not normally have anything to do with the ABS system / warning lights. The combination of ABS & Traction Control warning lights is a key indicator that one of the wheel sensors has failed. See "Related Questions" below for more specifics regarding the ABS sensors.
They are warning lights, not diagnostic codes. The ESP (electronic skid protection) and BAS (brake assist system) lights stay on when there is a malfunction. You will need to have the ABS (anti-lock brake system) computer checked for codes. They are warning lights, not diagnostic codes. The ESP (electronic skid protection) and BAS (brake assist system) lights stay on when there is a malfunction. You will need to have the ABS (anti-lock brake system) computer…
Why wont your speedometer after changing the sensor and the abs and check engine lights are both on?
What would cause your brake light and abs light to come on but not all the time on a 2002 chevy silverado 2x4?
Why do ABS and brake lights come on in a 1998 Dodge Ram 2500 and speed sensor has already been replaced?
Both the brake as well as headlights turn on when you turn on the lights on your 1997 Jetta GLS Brake lights stay on while driving What should you be doing?
this could mean a variety of things. the manual says if both the ABS light and the parking brake light are on at the same time to pull over (if driving) and tow it to a dealership. it is normal for both lights to come on when starting the car and then go off after a few seconds. I have the same problem with my 2002 protege but i have not had it looked at…
The ABS light is on because there is a problem with the ABS. Normally this means your regular brakes are still working as they should and you just do not have ABS. But your brake light is also on so this is far more serious. Check the brake fluid in the Master Cylinder and add as necessary. Use only the fluid type listed on the top of the cap. If it is full or filling…