it may not be grounded. correctly. did you check it before you put it on? check with volt meter see if it is getting power. also it maybe that the rod to the wipers are jammed check them out.
The 1998 Ford Crown Victoria windshield wiper relay switch can be found on the firewall in the engine compartment. The windshield wiper relay switch will be on the passenger side of the firewall.
i have replaced the fan, ( it does work when i attatch the code reader), the ac switch light does turn on, i have checked the fuses, all seem to be working, i am stumpted.
take the door panel off & power up the motor directly with jumper wires. if this won't work the motor is probably not working & will need to be replaced.
Yes there is. On the 1987 thru 1995 models the switch is located on the left side of the steering column.Its multi function controling the wiper/washer, turn signal and dimmer switch.
It maybe neutral safety switch .This switch is located around the steering column and tells the key switch the car is in park are neutral. standard trans have a switch on clutch pedal. hope this helps
How do I replace the windshield wiper switch?
The back windshield wiper may not be working because there may be a short in the switch. It is best to have an auto mechanic look at it.
Fuse? Connections? Switch? Wiper Motor? Could be any of those.
A bad fuse may be the cause of windshield wipers not working on a 1998 Lumina. The switch that activates the wiper motor is another possible cause for the wipers not working.
The wiper motor may not be working properly or the combination switch may also be not working properly.
either your motor burnt out or you have a faulty switch that turns them on. Or check the fuse
Did you check the fuse?
i found out for myself that if you jump terminal a&b at the compressor relay the compressor will kick on so i replaced the relay and it works.
Wiper motor is not working properly or the combination switch in the steering column is not working properly which is the lever that turns the wipers on.
Assuming they did not work with the old wiper motor, check the fuse, check the switch.
on the signal light switch
The door switch is bad. I have replaced the drivers side door switch on mine for the same reason.