Check your relay switches that should be located near the fuse box.
one of the lights is not working
turn signal switch needs replaced!
You may have blown a fuse or a flasher.
If the turn signals on a car works but the hazard lights do not there may be a problem with the flasher switch. The flasher is located in the steering column, and a damaged unit can cause the lights to stop working.
your hassard lites have a separate flaher relay change it.
The turn signal and the hazard lights each have their own relay. Sounds like you have to replace both relays.
Try pushing the hazard light switch on steering column repeatedly. I had a strange problem with my hazards once and this fixed it for now. I think my problem was the signals not working though....
first make sure hazard lights are not on.next you need to ckeck the grounds from the battery.
It contains two relays, one for hazard lights and the other for turn signals. The one for the turn signals is defective and must be replaced.
If your hazard lights don't work but your turn signals do work it could be that your Hazard Lamp Flasher needs to be replaced. Your car has both a "hazard lamp flasher" and a "turn signal lamp flasher". Your "turn signal lamp flasher" is working but your "Hazard Lamp Flasher" may not be working. Buy a new "hazard lamp flasher" and install it. The hazard lamp flasher is located behind the instrument panel to the left of the steering column.
Two different switches. The combination switch on the column is most likely the culprit. This may be fuses. The turn signals and hazard lights are fed by separate circuits.
bad fuse or hazard switch