The doctor or dentist needs to test to find out if a patient is a bleeder before the procedure in order to take precautions if the patient is a bleeder. Otherwise, the patient could bleed to death.
Tooth extractions and other operations necessarily involve cutting or breaking blood vessels, causing bleeding. If the patient is a bleeder, the doctor or dentist needs to know to take additional precautions to control bleeding.
i really dont know
they ask you that in the survey you take before you head in for an extraction.
you will bleed to death
Doctor has to test that if patient is bleeder before tooth extraction. Otherwise there may be continuous bleeding from the tooth extraction site or operation. Which may lead to serious consequences if left untreated. It is very easy to test the bleeding and clotting time. It is a bed side test.
Doctor has to test that if patient is bleeder before tooth extraction. Otherwise there may be continuous bleeding from the tooth extraction site or operation. Which may lead to serious consequences if left untreated. It is very easy to test the bleeding and clotting time. It is a bed side test.
Doctor has to test that if patient is bleeder before tooth extraction. Otherwise there may be continuous bleeding from the tooth extraction site or operation. Which may lead to serious consequences if left untreated. It is very easy to test the bleeding and clotting time. It is a bed side test.
Brake bleeder? Clutch bleeder? Coolant bleeder?
You will bleed this as in any normal operation. The bleeder is at the rear of the engine where the slave is. Two people needed. First slack the bleeder and then tighten it, make sure the reserve is full, Dot 4 is good. Pull the clutch in, HOLD, and you open the bleeder, air and fluid comes out, CLOSE the bleeder, release the clutch lever. Repeat as needed to remove all the air. Top up the reservoir all the time.
A bleeder is someone who or something which bleeds.
there is not a bleeder hose on the brakes. but there is a bleeder valve on every brake on every wheel
The most important use for the bleeder valve is to remove air from the braking system. As air rises and will not flush out of a bleeder mounted low on the brake the bleeder needs to be at the top.
where do you find the bleeder valve on a Ford Diesel F-250 6.0