the abs plug in on the wheel came off or it is a higher possibility that the brake fluid is low and when it gets to the limit line the light comes on
are brake lights staying on or is brake in the dash on ?
It is located just above the brake pedal pad.
It is quite simple to change the brake light switch on your 1998 Chevy S 10 pickup truck. The brake light switch simply plugs in and out.
Low brake fluid possible
Check the fuse, check the bulbs, then check the brake light switch.
that light is the low coolant warning light
If the light is in the center of what looks to be a tire with tread then it is the low tire pressure warning light. If the light is in the center of a symbol that looks like this (o) then that is the brake light warning. It can mean your parking brake is on or there is a problem with the brake system. Check the level of the brake fluid in the master cylinder resivoir.
This light is trying to tell you that your brake fluid may be low. Check your brake fluid and fill if it needs it.
You may have a blown fuse or a defective brake light switch.
You can reset your Chevrolet 2500 pickup truck airbag warning light by removing the airbag warning light fuse. Keep the fuse out for 10 seconds and replace it to its original slot.
Check brake fluid level in master cylinder Make sure parking brake is fully released warning light comes on because there is a fault in the brake system. you need to go to a mechanic before the brakes fail
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.
By repairing the problem. Low brake fluid, defective master cylinder, etc.
Check for a loose connection Check for a loose fuse in the fuse box Check for an open wire in the brake light circuit
Check the brake fluid level, as on many vehicles the "emergency brake" (in the UK, Hand-brake) warning light also acts as a warning light for low brake-fluid.
remove the neg wire to the battery and leave it off for 15 minutes
Make sure brake fluid in the master cylinder is at the proper level Make sure parking brake is fully released and switch is working
change the brake light switch
That warning light means a light bulb is out. Check all of your brake lights (including the brake light on the rear dash!)
The emergency brake is partially depressed, even though the brake light is not on. release with handle and pull up on the brake pedal.
...I have the exact same problem with my 1993 corolla.......Brake System warning light and discharge warning light
On the brake pedal.
fuse, bad turn siginal switch, bad bulbs, bad bulb socket, bad brake light switch mounted under the dash at the brake peddle.
It is quite easy to install the 1992 Chevy Lumina brake light switch. The brake light switch simply plugs in and out.