answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered
2008-01-25 18:00:17
2008-01-25 18:00:17

Because you may have to check your groung wire, or you will have to get another conector for the back of the radio. Also check your speakers and make sure there pluged in right.

-The car Genius- (not the spelling genius, however)

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


AM and FM radio antennas work by capturing electromagnetic radio waves in the air and feeding them into the radio. They are then broadcast in sound through the speakers.


there is a fuse. it is located behind the storage box to the left of the steering wheel. it is the fuse for the lighter as well.


It means Security and you need the lock out code in order to get your radio to work or go to a dealership.


Did it work before you replace the radio? Is the radio an original equipment radio? If it is original equipment, the radio wasn't the problem, the sound processor under the dash was. If it's an after market radio, you need to bypass the Infinity sound processor or make sure you have a wire connected to remotely turn on the sound processor. If none of this is the problem, check the fuses. In most cases, Chrysler recommends not running your after market radio through the Infinity premium sound system as does G.M. and Ford. You over load the processor and not only that but the ohm rating for your speakers doesn't match. Hope this helps


Radio communication works by converting sound waves into electromagnetic waves. These electromagnetic waves are then encoded in the radio frequency range of the FM or AM station your are listening to.


I guess technically the radio is still receiving broadcasts, but without an amp, you can't get them to be heard.


A code needs to be put in once the battery is changed. The code can be found in the owners manual


run the car for a hour and then turn the key to the on position and push the number 2 and 3 button on radio and it will give you a four digit code. Write it down you will need this to get your next code to put in the radio for it to work


try looking at the speaker connection in the trunk. If one is broken the system wont work


Yest, the Buick LeSabre from 1992-1994 is the same exact car, inside, outside, underside. Everything is identical, except say for the trim packages and options you get on them. Therefore, yes the cassette radio from a 1992 LeSabre will work in a 1994 LeSabre.


a mobil network works by convertin sound or voices into radio waves


Radio transmission occurs when sound or pictures are changed into waves and transmitted. Radio waves are then sent to receivers. The more powerful that a signal is, the further the signal will travel




as long as there is power to the radio the fuse is not the problem


You can buy a new one from here: <a href="http://www.cars.baigoods.com/" target="_blank" >Car Electronics</a>


Did the old radio have any sound? Do you get a strange code on the radio display indicating that you are locked out? You might have to pull the radio back out and make sure that the speaker connection plug is plugged in securely.


Solar panels work in space, so do FM transceivers, so yeah, sure! Your radio won't make a sound though :-)


First you should determine why the is no sound to begin with?If the entire radio system does not work at all you might have a simple electrical problem within the radios wiring.Possibly a blown fuse, or a loose connection behind the stock radio unit.Installing a new head unit(radio)may be your answer,but then you may have speaker issues as well.


how does the radio work because i can't cange it because i was it to be on 105.7


You have to turn on your car for the radio to work


The radio will work fine, but there will be nothing to hear.


You could have blown a fuse, you could have a wiring short. do you have a factory radio that requires a code if you lose battery power? it could be a number of things. eliminate what is not the problem first.


It depends on - the radio market you work in - the company you work for - your level of radio programming experience


A valve radio works much the same as a regular radio, but the signals are transmitted through valves (tubes) rather than transistors. The sound is believed to be better though a lot of people would dispute this.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.