answersLogoWhite
Spark Plugs and Wires
Chevy Blazer S-10
Chevy Cavalier Z24

Why does a 1998 navigator miss after changing the spark plugs?

Be the first to answer!


Related Questions


Spark plug tube seals need changing


Changing spark plugs is an important task. To do this, disconnect the battery and spark plug cables, and remove the old spark plugs. Next put in the new spark plugs, and reconnect the spark plug cables and then the battery.


Make sure you are using Ford OEM (Motorcraft is not always OEM) Spark Plugs that are designed for you explorer.


I am having the same problem, and would also like to find out.


It has spark plugs. They are just hidden from view.


It is important to remember the spark plug gap when changing the spark plugs of a vehicle. A 1998 Mazda B2500 has a spark plug gap of 0.042 to 0.046 inches.


Dirty spark plugs can occur on any make, model, or year. Changing the spark plugs should be done for maintenance, such as when you do a tune up.


you will need a 5/8 spark plugs stocket and a 7mm stocket have fun it not a go job about 5hr. to do just did one Sunday


Answer :jeep spark plugsfor some unknown reason Chrysler uses champion spark plugs and they work the best, everything else just does not seem to perform as well.If you are not experienced or knowledgeable with the jeep engine, have your mechanic do it for you,they can be a bugger


HTE SPARK PLUGS ARE IN THE TOP OF THE ENGINE JUST IN THE MIDDLE


Plug leads should last 3 or 4 times as long as plugs. They do not always abide by the rules, however. If you are running wonky and new plugs doesn't fix it, try new leads, it often works. If it does, put the old plugs back in with the new leads. I bet you will have a spare set of fresh plugs for another day.


how u change spark plugs on 1998 gmc safari van


It has spark plugs, plug wires, and a distributor.


You don't you can change them while the car is still hot its no problem.



Disconnect the battery, remove the spark plug cables, and spark plug boots. Remove the old spark plugs and replace with the new spark plugs. Replace the spark plug cables and connect the battery.


pull the old spark plugs out and put the new ones in dumbazz pull the old spark plugs out and put the new ones in dumbazz





it's a 4 cylinder car, right? so it should have 4 spark plugs.


The spark plugs on a 1998 Mercedes Benz E320 are changed by removing the cover plate, disconnecting the plug wires, and unscrewing the spark plugs using a deep wall socket. New plugs are then put in place and torque down to specifications.


I just replaced my spark plugs on a 1998 Ford E250 V6. The best price I could get for a mechanic to do it was $400.00. I did not want to pay this price and I am glad I didn't because changing the spark plugs took less than 1 hour. I went to Pep-boys and purchased the plugs and wires for about $50.00. (I had to purchase a spark plug socket for my ratchet.) To get to the spark plugs I removed the middle console from the inside of the truck's cab and the spark plugs were right there. You should be able to do this with no problem. (Stay away from the spark plug removal tool, use the socket and ratchet instead.)


There is a black cover on top of the cylinder head (the one with 20V written on it), the spark plugs are under it.


You do not need to remove the fuel rail to remove the spark plugs.



Copyright © 2021 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.