Car Batteries
Toyota Camry

Why does alarm system goes on and the car will not star when replacingtrying a new battery on a Camry 97?

585960

Top Answer
User Avatar
Wiki User
2005-10-14 15:50:43
2005-10-14 15:50:43

Possibly, wrong polarity. Check whether you connect the battery correctly or you are using a correct battery.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

on 1998 Camry turn key on push and release alarm button turn key off then start

User Avatar

The 1991 Toyota Camry has an alarm system button below the steering column. The ignition must be turned on and the button pressed for 30 seconds to deactivate the alarm.

User Avatar

alarm does not work can not start car help

User Avatar

Many camries have manufacture alarm system. You Camry has it, that's why it beeps when you lock the car. It sets yp the alarm system in the position ON.

User Avatar

How to disalarm the alarm on a 1992 Toyota Camry

User Avatar

The most common cause is that the rechargeable battery in the alarm siren is failing, giving a low voltage to the alarm system. When the voltage from he battery drops below a certain level the alarm system thinks someone is trying to disable the alarm by disconnecting the battery. As it thinks someone is trying to disable the alarm, it sets the alarm off.

User Avatar

I want to know if all Camry LE 2005 with security system with key code and remote entrance unlock have a alarm system with horn sound ...In the manual owner it's write i have but when i test the system the system dont't want go on.. May be the burglar alarm is in desable mode..... Some one can help me !

User Avatar

Some alarms systems have a protection function which will prevent starting the engine is somebody tried disconnect the battery and connect it again. Also what might happen is that your alarm system doesn't have memory in the case if you disconnect the battery. Thus, if you do disconnect the battery it will reset the alarm system to the default factory settings. By default, the alarm system will block starting the engine.

User Avatar

I would recommend contacting the installer of the alarm system, or refer to the owners manual of the alarm system installed.

User Avatar

When I replaced my wifes battery in her 98 Camry, I had her put the key into the ignition, turn it to "on" position, then I connected the battery cables, then have to take out the key,,,get out of the car,,,lock the doors using the key,,,,,open the door lock using the key,,,then start the car...seems that opening and unlocking the doors resets the alarm,,,

User Avatar

You first need to check the battery of your alarm system. Your alarm system may also be going bad and need to be replaced.

User Avatar

This is a statement. Ask a question.

User Avatar

I'm not sure what you mean by "kill switch" But there should be a red push button on the bottom left of your dashboard. The switch can be used to reset your alarm system

User Avatar

On my 96 Camry, there is a "kill" switch on the front left of the floorboard on the driver's side. If you switch it, it will deactivate the alarm. I don't know if that helps with this model though. Ignition key should be "ON" when you use the "kill" switch to de-activate .

User Avatar

If your alarm system beeps periodically, it may need a new battery. If you look inside the main control box you will find a 12 volt battery. If you switch this out with a new one your beeping problem should be solved.

User Avatar

I have a Honda Civic and the battery died, so i hade to jumpstart it and the alarm went off. The alarm went off because the security system that protects against robbers ext. But in my case, I had to put a master key into the ignition to stop the alarm.

User Avatar

not sure but disconnecting and reconnecting the battery does the trick

User Avatar

You can replace a battery with a battery of the same voltage but greater capacity as long as it will physically fit.

User Avatar

You can disconnect the battery, but that sort of defeats the driving purpose of the vehicle. Typically, WikiAnswers does not provide information that can used for illegal purposes.

User Avatar

Insert the key in the drivers door and unlock, lock. unlock again. That is how a factory alarm system is bypassed in case your battery dies in your remote.

User Avatar

The easiest way to reset your car alarm system is to remove the car alarm system fuse. You can also remove the positive cable from the battery. In both cases return the component to its original position after 10 seconds.

User Avatar

when the battery was disconnected on a 1996 kia sephia or deterrent system, why did the car stop working?

User Avatar

An electronic unit which controls an alarm system. This could be an Intruder Alarm, Fire Alarm etc. They commonly power the alarm system, monitor the devices on the system and display the status of the alarm system. Such as if there are any faults or alarm activations. Most also have their own battery back up, just in case the mains power fails, they are still fully functional. A user can control what the panel does. For example, to test the alarms, programme, disconnect certain circuits etc.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.