answersLogoWhite

0


Best Answer

They all go and it does work, I just tried it, and it worked for me.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why does all the numbers and letters for the dragon khan blade in aqw not fit in valencias code bar?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Other Math

Why are safey razor blades numbered on both sides?

Some brands of razor blades stamp the blades so that if there is a quality control concern during the manufacturing process there is a way to identify the sides of the blade. Usually the blade has "1 2" on one side and "3 4" on the other. People frequently ask if the numbers are to designate a side that is better for shaving, but both sides are the same in that regard. Some men use the numbers for keeping track of the edge that they most recently used during their shave. The argument is that flipping the blade in the razor between shaves allows the edge to be worn down more evenly. However, most people just ignore the numbers and enjoy their shaves as usual.


After changing the lawn mower blade on a Yard King with a universal mulcher blade - it doesn't cut the grass as well leaving strands of uncut grass Why is this?

If it is a multi blade unit check to see if the blades are the correct size, otherwise when mulching the machine is cutting and recutting the grass inside the deck, the grass must be cut often and it must be dry. Either of these conditions will cause too much grass to be inside the deck slowing down the mower and lessening its ability to cut. Traction speed must be also slow. You can probably hear rumbling noises in the deck along with the engine slowing down and when you lift the deck up wet grass will spit out. As a trade for not bagging clippings you will need to slow way down, cut often enough that you are cutting less each time, never cut when the grass is wet. The first thing i would do is to confirm proper/correct blade installation. If the blade is upside down it will cutwith the back side of the blade (not sharp). With the blade in place and the spark plug disconnected, gentle pull the starter handle with only enough force to cause the blade to turn slightly. Is the blade's sharp edge the leading edge. If not then remove turn the blade over and try it again. I have done this my self when i was in a hurry hope it helps.


Why can diamond cut another diamond?

Diamond grits can be joined together by an adhesive to form diamond blade. This diamond blade can be used in cutting or polishing another diamond. Diamond is the hardest mineral known and is the only mineral hard enough to cut another diamond.


What do you call a blade longer than a dagger but shorter than a sword?

A kodachi, a machete, a corn knife, a brush knife, a bayonet.


What is the defention of windmilling?

Windmilling is a phenomenon which can occur in aero-engines after a fan-blade has come o during flight. A fan-blade-o event is rare with only very few incidents per year and is, in most cases, no threat to the safety of the aeroplane. For an aero-engine to be certified by the aviation regulatory bodies, one requirement is that the manufacturer proves (with `fan-blade-o tests') that the fan-blade stays contained within the engine. However, internal damage to the integrity of the engine is usually such that the engine immediately stops to produce any power. For the remainder of the flight the incoming airflow will cause the engine to rotate, thus the name `windmilling imbalance' for this scenario. As one blade is missing, large out-of-balance forces of the order of a few tonnes from the now-asymmetric fan provide an excitation for the engine-wing-aircraft structure. Clearances which are sufficient during normal operation might now be overcome by vibrating components excited by the large out-of-balance force. This leads to rotor/stator interaction, which can potentially cause a rich mixture of effects associated with rubs and impacts.