answersLogoWhite

0


Best Answer

i have a 2002 saturn ls2. my transmission jerks in first and second gear and when i put on breaks. what should i do?

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why does my Auto transmission jerks in 2nd gear?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Renault senic Auto transmission stuck in 2nd gear?

Check auto transmission fluid level. If it's not that, an auto trans servicing outfit will be able to look at fault codes and diagnose a deeper problem if there is one.


HELP..I have an automatic '99 accord-right before the 1st gear is about to change to 2nd-sometimes to 3rd-the rpm rises or slips about 1000x rpm-but don't accelerate for a second-then jerks into gear?

You either need a new transmission or get it rebuild..


Why are you burning out 2nd gear on a 98 Camaro LSI auto?

1 the transmission is old and needs replaced 2 the user is pushing it too hard


No drive gear in 2002 Chevy auto transmission?

I had this problem in my 2007. the forward sprag was broken. i still had 1st, 2nd 3rd and reverse but no drive.


What P R N D 2 L?

Indicates gear positions of the automatic transmission; P=Park, R=Reverse, N=Neutral, D=Drive (transmission will automatically shift through all forward gears), 2=2nd gear (transmission will only shift from Low to 2nd gear), L=Low gear. Little known fact: In the auto business the indicator that displays this information is actually referred to as the "PRENDELO."


Is the transmission shot if the overdrive light flashes in Ford Mystique and the transmissions jerks sometimes between 2nd and 3rd gear?

Not necessarily, but continued driving may lead you there if it isn't fixed. It may be in the transmission control system that is causing the ill behavior. Pukenstein@aol.com


Why do you only have 2nd gear in a 2002 Chrysler PT Cruiser?

The transmission defaults to second gear when it detects a malfunction.The transmission defaults to second gear when it detects a malfunction.


When do you use drive in a standard transmission car?

There is no drive in a standard transmission car. In most cases you will have reverse, neutral, 1st gear, 2nd gear, 3rd gear, 4th gear, and 5th gear.


Why does your rivera rock in 2nd gear?

a Rivera rocking in 2nd gear indicates a transmission problem. Check the vehicle for bad computer codes. Check the transmission fluid for a burnt smell.


How do you check if transmission of Honda CR-V 1998 already failure?

If you are referring to an automatic transmission, the fact that it won't move the vehicle is one sign. When automatic transmissions fail they usually have a 'fail-safe' feature known as "limp home mode." The auto transmission will default to 2nd gear and will not shift out of that gear but allows you to drive short distances in that gear to get home or to a shop.


What makes a 700r4 transmission go from 2nd gear to lockup on a 1988 corvette?

== ==


Where is the 2nd gear switch located on a 91 Buick Regal?

Is this an automatic transmission?