three possibilities , fan thermostat switch is bad or cooling fan relay is bad, or radiator is low on coolant (possibly due to a leak - check reservoir & top up if needed).
The crankshaft sensor on a Rover 200 is located below and to the right of the generator and cylinder head temperature sensor. It is on the driver's side of the engine and above the oil filter.
There is a brown sensor that screws into a metal pipe on the right hand side of engine bay just behind the radiator, there is a black hose from the radiator that connects to the metal pipe then you will see the sesor screwed in.
1992 RANGE ROVER RANGE ROVER 3.9L 8-cyl Engine Code 3947ccCAPACITIESEngine, with Wix Filter 51452..........7.1 quartsHope This Helps
where is the speed sensor on a rover 200
how do you fixs in a rover 200 tow bar and wireing
Looking at the engine it is at the back towards the left hand side,it is hard to see
A Rover 200 can be purchased from a number of websites online such as: autotrader and carsite. Autotrader has one of the largest selection of Rover 200 vehicles on the net.
no, it will just add power.
Gasoline doesn't go in a radiator. Radiator is used to cool a 200+ degree engine block. If mixed the better question is at what temperature does gasoline ignite.
That depends entirely on which engine and which radiator options you have.
As you look into the engine bay, the reservoir is on the left hand side. About halfway up.
The horn on Rover 200 Series is twin horn and is tucked away by the side of the passanger side headlight.