Hi, I have a 1.6 Laser and it does the same thing. I have been told it does that because it is breathing too heavy. The reason into fixing that is to run a hose from the breather to a tin with a lid and run another hose from the tin the the air filter. It fixed my problem, Hope it works for you! Good luck
10thou inlet...12thou exhaust
PVC valve is bad
200 ford ranger tappet valve clearance
little breather on top of the rocker cover, pull it off and put the oil in.
The engine should have a crankcase breather tube connected between the valve cover and the air cleaner. With the crankcase breather removed and a non-vented cap installed on the valve cover in its place, the PCV would create the vacuum you have.
No just the rocket cover
hey man. tappet clearances are almost always in the manual of any car.. dont have the manual anymore? go to your local city library! they have car manuals from practically a-z! INLET ...10 thou... EXHAUST ....12 thou HOT.
1. Check out the water pump 2. check Timing cover gaskets
a ford laser a ford laser
In my 1993 Ford F-150, I had oil in the breather due to a blown head gasket.
you take the cap off the valve cover on the passenger side of truck or the oil breather cap on driver side to add oil
does not have a pcv valve just breather hose from valve cover to intake