Chevy Suburban
Cadillac Brougham
Fire and Smoke Alarms

Why does the alarm on a 1987 Brougham blow the horn and flash the headlights after it is put in service and after the alarm light goes out on the dash?

383940

Top Answer
User Avatar
Wiki User
Answered
2006-04-06 14:13:33
2006-04-06 14:13:33

'cos that is wt it is designed 2 do

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


It is possible that the headlights are activated by the alarm. If that is not the case, if it has auto turn on headlights the module can be going bad. Other than that I don't know.


It should only flash when the doors are locked and the alarm is armed.


If the headlights flash on and off, there may be a problem with the bulbs or fuses. There may also be a problem with the battery connections or wiring.


TRY CHECKING TO SEE IF YOU HAVE A HIGH BEAM HEADLIGHT OUT. tHIS WILL CAUSE THE PROBLEM YOU HAVE.


You could be hitting the flash feature on the turn signal arm when you use it.


you've got a short or a bad fuse


you probly have loose light bulbs


No this is a myth and what dumb question


because you turn them on and off, on and off...


Short circuit in your vehicle alarm system. In most alarms, some lights will flash on and off as an indicator of an attempted break in.


In Illinois, yes. It's called improper use of high beam headlights.


Generally, you press the remote button once and the alarm arms and the lights flash once. If you press it a second time, the lights flash again and the alarm chirps.


A tsb is a technical service bulletin. A flash is a software update for a computer.A tsb is a technical service bulletin. A flash is a software update for a computer.


This repair is probably well beyond your capabilities. They'll need to get into the ECM and program it for the alarm.



To re fresh the alarm, remove the fuse to the alarm, for 30 seconds then re fit, but be ready on the alarm key fob, to turn the alarm off, becose it will sound and flash the lights, when you first put the alarm fuse back in. After you turn off the alarm witht he key fob, it should work as normal alarm again :).


You can watch TV shows online without Adobe Flash as long as the service providing the videos does not require Adobe Flash. If the provider requires Adobe Flash, then you cannot use the service without Adobe Flash.


Answer: on the turning signal switch turn the handle forward for headlights. high beams pull in to flash. push out for high beams to stay on.


i assume you mean your marker lights. it sounds like your alarm going off, you must have a aftermarket alarm



you most likely have a short somewhere in your wiring



The alarm can cause your lights to flash and keep the engine from starting. Remove the car alarm fuse, for 30 seconds. Put the fuse back into its original slot and the car alarm system should be reset.


Usually a device is used to cause the lights to flash, which alerts the deaf person.


Tailgate. Or try to pass on either side. Flash it's headlights at you.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.