A 2000 Honda Accord check engine light will stay on if the ECU is not reset. To reset the light remove the ECU fuse from the engine bay fuse box. Reinsert it after 5 seconds.
Computer has detected a problem with the emission's system.
Usually a problem in the emission control system - have vehicle scanned to determine the problem
It can only mean one thing "Check your engine"
it means you need to check the engine
You can not disconnect the check engine light.
A flashing check engine light is an indication of a severe engine misfire.
Auto Zone will check your engine light for free... Write down the codes and go from there.
The check engine light is a " picture " of an engine , just to the left of the engine temperature gauge
According to the 2000 Ford Explorer Owner Guide : No , a separate fuse for the check engine light is not listed
a 2000 dodge ram 1500 the check engine light is on and the code says torque converter and clutch and overdrive solenoid. what do you think that the problem is?
With a scan tool.
Check the oxygen detector.
With a scan tool.
A flashing check engine light normally means you have a misfire.
Can be the fan motor is defective, thermal relay is bad, fuse blown, or loose connection.
you need a scanner
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
take it to macanic
This is most likely either a bad gas cap, or an evaporator bypass valve. Both items can do this. Normally, either will activate a check engine light, but sometimes the part will be on the border of going bad, but just not enough to activate the check engine light. Check the evaporator sensor with your local Honda dealer.
There are pages and pages of things that can turn the check engine light on. You need to have it checked for codes to know what the cause might be.
Disconnect battery and leave for about 10 min. Then reconnect. The check engine light went away on mine.
A person can reset the check engine light by using an OBD scanner to clear the codes. This is after the problem is fixed.
There is no individual fuse. The ECM has 2 or 3 fuses, and it controls the check engine light.There is no individual fuse. The ECM has 2 or 3 fuses, and it controls the check engine light.