Be the first to answer!
In the fuel tank.
where is the fuel pump on a 89 Mazda b2200
How do you replace fuel pump 92 Mazda pick up B2200?
A Mazda B2200 engine with carburetor has 85 horsepower, and with fuel-injection has 105 horsepower.
in the gas tank ?
92 b2200 ,fuel injection psi should be 38 to 46 psi
It's in the fuel tank. You have to get access to the top of the fuel tank
If it is like the b2600i and b2200 it should be right behind the driver kick panel.
the fuel filter is located along the frame on the drivers side
it con-nets to the fuel pump and the gas tank
If it is mechanical the diaphragm has a hole in it.
in ur butt
it should be near the gas tank above the fram rail
first thing is to work out which part is at fault? I would start with dash gauge, find wire at fuel tank which goes to gauge, earth this wire out to body while having friend watch fuel gauge, if it goes straight to full it mean dash gauge is good but sender unit in fuel tank is probably at fault. Go to car wreckers for s/h part.
Checked my '90 B2200 owner's manual and it sez: Carb: 0.031" (+/- 0.002) Fuel injected: 0.043" (0.004)
where is fuel gauge and how to replaced for a 1986 Mazda pick up B2000 please let me know thank you
Bad fuel pump or fuel filter?
behind the fuel tank you will see a clamp this is where the filter goes at least it is there on my 1989b2200
Check the fuel control relay behind the drivers side kick panel. Could be bad. If that is ok start at the fuel tank and check the wires and connectors to the front of the truck. Good Luck Jerry
Look under vehicle follow fuel line from tank
i own a 1990 fuel injected b2200 they didn't make very many but some of the 90-93 are injected.. finding parts are expensive and used parts for the motor are impossible to find
If the fuel gauge is stuck, the needle never moves, then the gauge has a problem and needs to be replaced.
for the long bed 17.4 and short bed 14.8 this is for the 87 model standard cab or cabplus depends on which model you have.This is straight out of the manual!!!