Why does the low beam on my integra not work?
blown fuse/blub on the lowbeam is pop/wiring is messed up
Do the high beam have to work in order for low bean to work replaced low beam bulb and still does not work?
No the high beam filament is independent from the low beam filament You can run them seperately or together . it depends on how the lights are set up. For instance if you have your high beam on you may have your lows running at the same time, however if your low beam is on low beam setting, your highs are always turned of It sounds like you may need to look at your fuses…
Your peugeot 306 xnd headlights work on full beam the low beam will not work the fuses and lamps are ok and the dashboard light says the low beam is on and it isn't any ideas anyone?
If the low beams are not working on a Peugeot 306, it is possible that the low beam headlights are burned out. If the high beam headlamps are part of the same bulb, perhaps the wrong bulbs are in the sockets. Some older cars have both the high and low beams running off the same bulb and the low beam can burn out both sides at the same time.
If your low beam headlights work but your high beam functions fine on passenger side but not driver side where do you troubleshoot?
Why wont the headlights come on in a 94 Buick Skylark 6 cylinder custom if the parking lights and signals work and the brights work?
What would cause both 'low beam' lights to not work but still allow the 'high beams' to operate on a 1993 Mazda 323?
Why do low beams work when daytime driving lights are on but when auto or manually turning on the lights a left low beam does not work on a 1995 Ford Explorer?
Why would low beams work but very dimly in 2003 vw passat - the high beams work ok - is there a way to tell if you are seeing drl or low beam lights - are the drl and low beam one and the same?
All vehicles are required to have low- and high-beam headlamps. If your low-beam headlamps both fail after dark, try switching to high beam. If the high beams don't work either, switch on the emergency flashers. In either case, get the car out of traffic and off the road as quickly as safely possible.
What would cause the low beam headlamps to stop working on a 91 Geo Prizm but the high beams work fine and the blue high beam indicator doesn't work either - have checked fuses and relay?
OK, the REAL reason this happened is that the GROUND from the LOW BEAMS opened and did not return to the dash. This causes the HIGH BEAM indicator to not work (because believe it or not, they use the low beam filaments as a return for the low beam indicator!), but the high beams to still work OK. Rather than disassemble the whole dash & turn signal assy., I just ran an additional ground wire…