answersLogoWhite

0


Top Answer
User Avatar
Wiki User
Answered 2007-06-24 17:54:28

Pulleys misaligned? Defective tensioner?

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Loading...

Still have questions?

Related Questions

WHAT PULLEY DO I loosen to get single drive belt on?

If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.


How do you set serpentine belt tension on a Chrysler?

The tension on a serpentine belt is automatically set by the Idler Tension Pulley. If you find it is not correctly setting the tension, the the spring may be broken.


How do you tension serpentine belt on Nissan zd30 engine?

The zd30 has a hydraulic tensioner using an idler pulley to automatically tension the serpentine belt.


Where is the tension adjustment for a 1995 Buick lesabre serpentine belt?

There is no tension adjustment. Tension is automatically adjusted by the idler pulley.


How do you loosen the serpentine belt tension on a 2005 grand caravan 3.8L?

To loosen the tension on a serpentine belt on a 2005 Grand Caravan 3.8L, turn the nut of the belt tension pulley to loosen it. Adjust the belt, then tighten the tension pulley by turning the nut in the opposite direction.


How do you get 2002 Toyota rav 4 serpentine belt on?

Regardless of what type of vehicle you have, it is extremely difficult to replace a serpentine belt w/o a serpentine un-tension-er tool. This is a thin, long handle with a socket on the end that sticks out at 90 degrees of the handle. The socket slips onto the bolt-head of the tension-er pulley. Once the serpentine belt is threaded around all the other pulleys you put the un-tension-er tool on the tension-er pulley bolt and pull (or push) to achieve slack in the serpentine belt and slip it on the tension-er pulley.


Loosen tension on serpentine belt on a 2000 jeep Cherokee sport?

Loosen bolt in tension pulley, then loosen tension bolt. Replace belt. Tighten tension bolt. Last, tighten bolt through pulley.


How do you replace a tension pulley on a 2001 Lincoln town car?

Disconnect the battery.remove the serpentine belt.Unbolt the pulley.


Where is the tension bolt for the serpentine belt on a 99 alero?

It's on the center of the idler pulley


What tool do you use to loosen the serpentine belt tension pulley on 2002 jeep wrangler v6?

A ratchet isÊneeded to loosen the serpentine belt tension pulley on a 2002 Jeep Wrangler V6. It will require a 1/2 inch ratchet.


How do you removereplace serpentine belt to 2005 dodge diesel cummins 2500 5.9L?

A serpentine belt on an engine is held in place by a pulley that maintains the proper tension on the belt. This pulley can be pulled up to release the tension on the belt. Do not pull the pulley out, but gently up or you'll risk damaging it.


What is a tension pulley on a Pontiac Sunfire 2.2 L Engine?

tension pulley is an automatic tensioner that keeps the serpentine belt at the proper tension it is a single pulley that is smooth (no grooves) usually turning clockwise with constant pressure loosens pulley for belt removal use caution pulley is spring loaded


How do you release tension on your 94 s-10 belt tension pulley?

tenion pulley on serpentine belt will not release on 94 S-10 4 cy. with air


How do you tighten a serpentine belt for a 1998 Ford Contour?

Buy a Chevy!!!! That was a big help. Most but not all serpentine belt systems have a spring loaded tension pulley that just holds constant tension on the belt. If there is a tension pulley, it will be the one pulley that is not attached to anything like the alternator or AC. After that, the alternator is the most likely to be the one that adjusts.


How do you tighten the serpentine belt on a 1995 Nissan Sentra?

you don't tighten a serpentine belt the tension is supplied by a tension pulley if belt is loose, it is time to replace belt or tension pully if tension pully needs repplacing belt will be worn anyway


How do you replace the serpentine belt tension pulley on a Buick Regal?

with a 9/16 socket and ratchet


How do you release the tension to install the serpentine belt on a suzuki aerio?

15 mm wrench Put it on the tension pulley and pull to take tension off belt


What is a belt tension pulley?

Most cars now have a serpentine belt that drive the alternator, water pump, power steering unit, etc. The belt tension pulley is a spring loaded pulley that keeps the proper tension on all these units. It can be moved to release the tension in order to remove the belt.


How is the correct amount of tension determined when installing a serpentine belt on a 1994 Dodge Ram 250 van?

Serpentine belts have a pulley that is spring loaded. Tension is set automatically when the belt is installed.


How do you install the serpentine belt on a 2005 Scion Xb?

Regardless of what type your vehicle is, it is extremely difficult to replace a serpentine belt w/o a serpentine untensioner tool. This is a thin, long handle with a socket on the end that sticks out at 90 degrees of the handle. The socket slips onto the bolt-head of the tension-er pulley. Once the serpentine belt is threaded around all the other pulleys you put the untensioner tool on the tension-er pulley bolt and pull (or push) to achieve slack in the serpentine belt and slip it on the tension-er pulley.


How do you install a serpentine belt on a 1993 doge caravan?

Regardless of what year your Caravan is, it is extremely difficult to replace a serpentine belt w/o a serpentine untensioner tool. This is a thin, long handle with a socket on the end that sticks out at 90 degrees of the handle. The socket slips onto the bolt-head of the tension-er pulley. Once the serpentine belt is threaded around all the other pulleys you put the untensioner tool on the tension-er pulley bolt and pull (or push) to achieve slack in the serpentine belt and slip it on the tension-er pulley.


How do you move the tension pulley?

There should be a "square" cut into the pulley bracket that fits either a 1/2 inch or 3/8 inch ratchet or breaker bar to allow you to remove tension from this pulley allowing you to replace the serpentine belt.


Why would 98 ford Taurus be making noise if you changed the serpentine belt idler pulley and tension pulley?

replace the belt with a goodyear bet


How do you adjust the tension on a serpentine belt on a dodge Dakota 2002?

You don't. The serpentine belt tension is automatically maintained by the tensioner pulley, which is an idler pulley located on the passenger side of the system and looks like it doesn't drive anything. If the belt tension is incorrect, the tensioner pulley must be replaced. If the question meant 'how to release tension from the belt' (for removal, etc.), this is done by applying the correct size socket wrench to the tensioner pulley's center nut and rocking the pulley away from the belt.


What do you need to loosen to change the serpentine belt on a 4 cylinder 1998 jeep wrangler?

u need to relaese tension on the tension pulley. this is usually done with a long socket wrench handle. when u release tension and remove belt you then release tension on pulley until you have routed new belt . you then move tension pulley again until you can put belt on it, then release pulley and it will automatically provide correct tension