answersLogoWhite

0


Best Answer
Copy

It could be a bad cap, rotor, pickup coil/reluctor, or a loose ground.

User Avatar

Wiki User

โˆ™ 2004-12-14 06:02:37
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Add your answer:

Earn +5 pts
Q: Why does the tachometer jump around and the engine cut out on a 1995 Honda Accord V6 in all weather even after replacing the ignitor module?
Write your answer...
Submit

Related Questions

Where is the ignitor located on the 92 accord?

In the distributor. You have to remove the distributor cap to gain access to it.


Why Honda accord lx 92 distributor is not getting any fire?

IT IS A BAD IGNITOR ON THE INSIDE OF THE DISTRIBUTOR.


Tachometer gas gauge and speedometer not working on 94 accord?

You may have a blown fuse.


99 Honda Accord 4cy does not start when hot out but starts when cool out. please need help.?

HI, I would suggest you check the ignitor .My 1993 Honda Accord LX had the same symptoms. Mary


What should rpm be at 65 mph on 96 accord?

I have a 97 accord, Mine runs normally at 2000RPM's. At 70 MPH it goes up alittle above the "2" on your tachometer. Hope this helps you.


Why the tachometer goes to zero while driving on a Honda Accord?

Bad connection somewhere? Loss of power? (check and wiggle fuse)


Replacing starter in 1997 Honda accord lx?

ask a mechanic sucka!


Where is the main relay on a Honda accord?

In hot weather my Honda Accord 2000 starts but idles rough and dies.


Why is Tachometer alone not working in 1997 Honda Accord. What needs to be taken care?

I have read it is a problem with the ignition coil.Even if the coil seems O.K.


What does an ignition module looks like and where can you find it on your 93 Honda accord?

inside distributor under cap (expensive) Honda calls it an ignitor its part of the distributor actually it is the distributor


What is cost of replacing rear passenger door on 2002 Honda Accord EX?

1k


How do you replace dash lights on 99 Honda accord?

replacing dash board lights


How do you decide if transmission or the chip is needing replacing on a 1998 Honda Accord?

Seek professional help.


Does replacing a transmission in a 2004 Honda Accord affects the clock spring in the airbag?

No, it will have no effect on the clockspring.


Step by step directions for replacing the starter on a 1994 Honda Accord?

Is there a good site to go to asap to find how to replace a starter for a 1994 Honda Accord EX


In cold weather turn signal does not work?

1995 hond accord in cold weather turn signal does not work?


Why is 1994 Honda Accord Lx hard to start when weather is hot?

crank no start hot weather1991 Honda accord no start hot . but will start for a second with starting fluid . not getting fuel


Your engine came back on after replacing your egr valve on your 1999 Honda accord ex?

So, ... what is your question?


Why is my 1998 Honda Accord speedometer not working?

Check the #6 fuse. If it is good then the VSS needs replacing.


What is the price of replacing brake pads and rotors for a 2004 Honda Accord?

In may area around $150.


Why does the tachometer jump around and the engine cut out on a 1995 Honda Accord V6?

I don't have the answer to your question, but I have a similar problem and have tried a number of things. My Accord V6 is a 1996 and the same tachometer problems have been appearing and disappearing for about one year. Even the Honda dealership couldn't fix the problem. They have changed the plugs and rotors and the ignition kit. Unfortunately, whenever I try to bring the car in, it runs fine. Let me know if you get a fix.


What is the oil capacity for a 1987 Honda Accord lxi?

The capacity of the oil is 3.5 litres when replacing oil and filter.


Does head bolts have to be replaced after replacing head gasket on 1990 Honda accord?

Yes, replace the head bolts.


Instrucions for Replacing 2008 Honda Accord Cabin Filter?

Click the link for a video of changing the cabin filter.


How do you replace the water pump on a 1986 Honda Accord?

In my '87 accord, replacing the water pump was a big ordeal at the shop - $550 was a bargain price for the job. it involved the same work as replacing the timing belt - which was only $50 extra at that point. Not that this is a specific answer, but the point is that it's hard. Rick