My 2002 chevy impala security lock but i can jumpstart it and it start but after a few hours it dose it again how can i fix it
Not without "hotwiring" it
get a circuit tester and start looking with the key on
If a 2001 Chevy Impala will not start after replacing a thermostat, perhaps it is possible that a sensor was bumped unknowingly. Check all of the sensors that might have been touched during the changing of the thermostat to see that they are all still plugged in.
The remote start will not turn on the air conditioner in your 2013 Chevrolet Impala. The air conditioner will need to be left in the on position when the car is shut off.
Yeah sure, its that thing you stick your key into to start it.
electronic ignition module
it indicates that the alternator is not functioning sufficiently to keep the battery charged.
your car does not have a choke like in the old days. THE COMPUTER SETS THE AIR TO FUEL TO START THE ENGINE.
Get a big hammer and start beating on the car from the front to the back and keep repeating.
bad ignition, bad battery, bad starter, need more info in the question
well, look under the hood for a start..... if you have a 3.8 you will have a black cover that will say so.
how to jump start 2009 impla
Just like you jump start any other car. Connect positive cable to positive post of battery and connect negative to any metal part of the engine or frame.
1975 for the HEI (High Energy Ignition) system (no more ignition points)
Could be several things, however, it is probably an exhaust leak, or in the valve trane. I would start by checking the oil, however, as this is a warning sign, of it being low.
my 1958 Chevy will not start sometimes
I have a 93 chevy pick up all I want is to hard wire the starter so the the truck will start with just wire straight from the starter to battery
isuzu impala infiniti
You need to replace the gauge cluster... I hate to say that, but that is the only fix. It is common on the silverado series trucks as well. This was verified by 2 mechanics and the Chevy dealer.
turn the ignition key on (don't start) and depress the accelerator pedal 3 times within 5 seconds.
You could have a bad thermostat....mine wasn't moving at all and the fan would come on at start up.Make sure to clear your computer after you change it.
Take the electronic ignition module to advance auto parts have it tested for free
people start buying Chevy cars