Chevy Blazer

Why does your 1996 Blazer Keep blowing the flasher out for the turn signals?

131415

Top Answer
User Avatar
Wiki User
2005-10-20 14:41:54
2005-10-20 14:41:54

You have a short in the wiring or at one of the bulb assemblies.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Yep, one for the signals and one for the emergency flashers.

User Avatar

I believe it is in your glove compartment there is an access to your flasher.

User Avatar

In our 96 Blazer S10, it was behind the radio. We had to remove the radio to get to it.

User Avatar

I asked my dealer the same question and he said there is no fuse for the turn signals. There is a flasher assembley. If you think you blew a fuse check the flasher assembley but where is that?

User Avatar

it is located behind the ciggeratte lighter. But you have to have the star drivers to be able to get to it

User Avatar

The flasher unit for both the turn signals and the emergency lights are under the dash, between the center console and the storage area. It's not hard to get to, just takes some time and patience.

User Avatar

flasher on 1996 Harley roadking

User Avatar

No, there is only one flasher which works both the turn signals and emergency flasher. It is located on the drivers side, under the dash, above fuse block, mounted on kick panel.

User Avatar

where is the turn signal flasher on a 1996 lumina sedan

User Avatar

Check the fuse, check the flasher relay and check the bulbs. It's probably one of the three.

User Avatar

1. Bulb 2. Fuse 3. Flasher 4. Turn Signal Lever

User Avatar

Power seat relay location for 1996 Blazer

User Avatar

On a 1996 Ford Bronco the turn signal flasher is plugged in to the fuse box

User Avatar

what is the distributor setting for a 1996 Chevy blazer

User Avatar

my Chevy blazer power seat on my 1996 Chevy blazer isn't working

User Avatar

fuses for signals on lincolns are located under panel to left of steering wheel book will give specific location number of fuse it is a 15 amp fuse

User Avatar

what arethe 3 relays in the glovebox on a 1996 chevy blazer

User Avatar

More than likely a bad flasher relay for the turn signals. The hazard lights use a different flasher relay.

User Avatar

the multi-flasher for turn signals/hazards is mounted to the brake pedal bracket under the dash on driver side. turn on flashers or hazards and listen and feel for the clicking. check auto zone site for pics and instruction

User Avatar

What is your 1996 Chevy blazer LS with a blown motor worth?".


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.