what year and model? just any 350? i would bet its has todo with fuel (carb or fi tbi
check your mass air flow sensor . tap on it GENTLY . should start
check for spark from the number one plug wire if no spark then start with the coil
A 2003 Chevy Suburban will crank but not start if it has no spark or fuel. Checking for a clogged fuel filter or fouled spark plugs can help to resolve the problem.
If the car will not start...the spark-plug is bad.
are you getting spark?
Does it have fuel, spark, compression?
You are missing fuel or spark.
if it is cranking but wont start check for spark, fuel, air and compression.
For an engine to start it needs spark to the plugs and fuel. Without both it will not start.
make sure its not getting to much fuel and check the timeing/and if the wires are in the right order
My 86 vette was doing that ,was getting fuel and spark to the distibutor , but had no spark to the fuel injector ,fixed fuse problem , started are away and stayed running
check for spark
check/replace spark plugs
Does it turn over? Does it have fuel, spark, and compression
my 1999 Chevy blazer has spark and fuel getting to it I will not start why
Compression ok?
1998 chevy blazer wont start good spark and good fuel presure
Impossible to see from my house, but you'll need to start by finding out if you have spark, fuel, and air. And if it's happening at the right time.
You need three things to start an engine. Gas, spark and air but, they all have to be in the right place at the right time. So, I would say you have a timing problem. It may be something serious or it may be something less serious like an engine compter or something like that.
first check to see if your getting spark, or fuel
Check your starter.
No. The spark plugs are responsible for igniting the fuel in the cylinders. If you start yanking them out, the engine is going to stop running. This is covered in the book Things That Dummies Do.
its need 3 things to start fuel spark compression and they have to be all at the right time
Does it have fuel/spark/compression?
ignition module failure or ecm failure.