Bad ignition switch or wrong key.Just replace with new switch about $10.00 NAPA
i suggest u either get a new key or ignition
try releasing the tension on the steering wheel by turning the steering wheel left or right as you turn the ignition key
I have a '97 Chrysler Cirrus it happens to sometimes. Try to turn the steering wheel back and forth as you turn the key.
Put a good key in the ignition and turn the key on.
The key to my ignition broke off in the ignition. Luckily, I was able to insert the remainder of the key in the ignition and turn on my car. In order to fix the problem, I had to take my car to the dealer and I am pretty sure they removed it and installed a new ignition "key hole" keyed to my car. It is a 1990, and I believe the problem happened approx 1993?
place the key in ignition and turn
turn wheel and key in the ignition at same time.
Press unlock on a remote, or turn ignition on with a good key.
Probably wore out ignition key or switch or needs lubrication.
Unlock with remote or turn ignition on with the proper key.
turn steering wheel to left tight while turning key
Put the key in the ignition. Tap it (not too hard) with a rubber mallet or similar object. Turn the key.