One reason could be the bulbs are bad.
make sure high beams are not on
Your high beams work but your low beams do not because the switch is broken that switches between high and low beams. Electrical switches wear out.
i dont know anything
If low beams do not work and the high beams of a Mitsubishi Eclipse do, it is probably due to a corroded connector. Simply clean the connector and add some petroleum jelly to the terminals.
Take your car in to have it checked. Turn signals should work without high beams.
First check the bulbs, if the bulbs are good I would suspect the high/low beam switch is bad.
As a guess both low beams are burnt out The daytime running and high beams are the same light filament. Or the fuse or the relay for the low beams.
High and low beams have differant filaments. You have to replace the bulbs.
check the bulb low bean burns out before high beams
Why all of a sudden the low beams dont work but everything else does.
your bulbs are burnt out. when you switch on the high beams its only the high beams. but when you flash your brights it lights up both high and low beams.
check all the wires that ground coming from the headlight