brake lights dont work
change the brake lights check the fuse check the brake light swtch
replace brake light switch on brake pedal
Check the fuse, the bulbs, and the brake light switch.
all my lights work except my break lights, when i push on the peddle they dont go on can you help me?
I dont know because i dont have a FORD Check your brake light switch on the back of your brake pedal for adjustment.
it dont have lights
Brake pedal switch, wiring, bulbs, bad trailer harness (if there), fuses...
Did you replace the fuse? have you checked the circuit board well the lights go on cause they tend to short out often
look at the top of the brake pedal under dashboard you can usually adjust them so the brake lights dont stay on.
Have an electrician check the wiring that goes to the brake lights in the trunk of the car.
Brake lights and turn signals are on a separate circuit from the tail lights. Tail lights are on the same circuit with the dashboard lights. If the dashboard lights aren't working either, check the fuse. If they ARE working, check the headlight switch.
i got a 2006toyota highlander my tail lights dont work but,every other light works please help me
Maybe a fuse or relay burned out sounds like a bad multifunction switch, very common issue with older gm's in the 90s. Believe it or not gm wired the brake lights to be powered off the multi-function switch assembly in the steering column
Check the brake light fuse first. Then check for a bad brake light switch at the brake pedal.
Check the brake light fuse. If you have 12 volts at the brake light switch I would suspect the signal light switch is at fault.
check your bulbs
it could be that your brake light switch under your dash that sits right on top of your brake pedal has gone out
Above the brake pedal. If your main brake lights dont work but your third center brake light does, then the brake light switch is not the problem. Its is the turn signal switch.
Defective or out of adjustment brake light switch. Look somewhere on the upper part of the brake pedal for the switch.
Check bulbs - they are double filamented with smaller being for brake lights Check stop light fuse Check the operation of the brake light switch Check sockets for corrosion and ground
First things first you need to check your fuses. In the owners manual you will find the location of the fuse that relates to the brake lights. Take the fuse out and hold it up to see if the connection is broken if it is replace and the brake lights should work.
I am having the same trouble. My brake lights work with the light switch for nighttime driving, but only far right brake light works when i pres brake pedal. Reverse lights dont work at all. Turn signals and hazard light work.
If the headlights are on and brake lights work but not the tail lights, it is possible there is a short in the electrical wires. Another cause for this could be that the tail light bulbs are burned out. Most vehicles have more than one bulb inside the tail lights to control different lights at the same time.
turn signals work butt the brake lights dont can anyone help please? cant afford a mechanic.