answersLogoWhite
Computer Hardware
Computer Networking

Why is a router important?

123

Top Answer
User Avatar
Wiki User
Answered 2011-10-05 15:33:10

Yes, it is very important because it connect the computer to everything. It connect the printer to your computer. It also connect the internet as well.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Your Answer

Related Questions


Why is a router important?


How important is a 3 wireless router to you? This all can be dependent on what type of internet service you have. If you have the type of service that can clearly benefit from such a router, then it might be worthwhile to invest the time and effort into getting such a router.


That's the command, on a Cisco Router, to show the routing table. It is one of the most important troubleshooting commands.That's the command, on a Cisco Router, to show the routing table. It is one of the most important troubleshooting commands.That's the command, on a Cisco Router, to show the routing table. It is one of the most important troubleshooting commands.That's the command, on a Cisco Router, to show the routing table. It is one of the most important troubleshooting commands.


You cannot use a switch as a router. While externally they appear similar, a switch lacks many of the capabilities of a router. One (and probably most important) of them is NAT - Network Address Translation, which makes a network within the router separater from networks outside the router.


A d-link router is a standard network router, one which was made under the brand-name d-link. In all important respects it is equal to a similarly equipped linksys or netgear router, but is a less expensive brand.


When purchasing a wireless router the most important feature is what speed it is and how many computers or devices it can handle being on it's network. Above and beyond that though, the price is the most important.


It depends on the tool. In a large drill press, torque is more important. In a small edge trimmer router, rpm is more important. In a large plunge router both are of equal importance.


A router.A router.A router.A router.


Since each router is different, it is important to find the information specific to your router. Consult the user manual or manufacturer's website for the specific model of router. Or, consult the internet provider's website or customer support line for more details on setting up router security.


Here is a basic overview of the configuration of RIP on a Cisco router:Router(config)#router ripRouter(config-router)#network 192.168.1.0Router(config-router)#network 192.168.2.0Router(config-router)#network 192.168.3.0Router(config-router)#network 192.168.4.0Router(config-router)#network 192.168.5.0The 192.168.x.0 address can be changed to whatever address you would like to be broadcast over RIP. There are also other settings that can be configured.If you use RIPv2 you can also have the following configuration:Router(config)#router ripRouter(config-router)#version 2Router(config-router)#network 192.168.1.0Router(config-router)#network 192.168.2.0Router(config-router)#network 192.168.3.0Router(config-router)#network 192.168.4.0Router(config-router)#network 192.168.5.0Router(config-router)#exitRouter(config)#exitRouter#%SYS-5-CONFIG_I: Configured from console by consoleRouter#copy running-config startup-configDestination filename [startup-config]?Building configuration...[OK]Router#


The ADSL modem wireless router works decent according to reviews. However, I would replace your router with one such as Netgear, or a well known brand name router. Often, these will offer warranties. Routers are not cheap, so the decision is important.


Router 5012 is a very good router or try and SMC router


on the router then off the router your ios is install on the router then off the router your ios is install


the ipod simply scan for near networks but the router is the one that makes the trick in other words the range of the router is more important...


It would be on your router. the PS3 does not have a router you have to buy one if you need a router


edge router,wired&wireless router


No router eigrp <AS #> No router ospf <process ID> No router bgp <AS #> No router rip


A(config)# router rip A(config-router)# passive-interface S0/0 B(config)# router rip B(config-router)# network 192.168.25.48 B(config-router)# network 192.168.25.64 A(config)# router rip A(config-router)# no network 192.168.25.32 B(config)# router rip B(config-router)# passive-interface S0/0 A(config)# no router rip


If your router does not support N, you have to basically get a new router.


You can't "share files using a router". You need some kind of network connecting the computers, and a router may be a part of that, but it's not the only part or even the most important part (and you don't technically need a router, specifically, at all).


I think it's this.Remove Console passwordrouter>enablerouter#configure terminalrouter(config)#line console 0router(config-line)#no loginrouter(config-line)#no passwordrouter(config-line)#exitrouter(config)#exit


It is your router that disconnects the PS3 and not the PS3 that disconnects the router. Set the router to always on for internet connection, your router is disconnecting when it is not being used by the PS3 for the internet


Yes, it is very important. It connects the computer to everything. For example, if you have one, it connects the printer to your computer. It can connect to the internet, as well.


The PS3 does not have a router. It can go online with an ethernet cable connected to a router or modem or with WiFi from a wireless router or modem


IP address remains the same. Mac address changes from router to router.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.