It can be ;)
just flip the paper
Explain why the innerlayer two layers of an scr are lightly doprd and are
== == == ==
Many household dimmers are SCRs. The dimmer control knob or slider actually adjusts at what point along the AC wave the SCR turns on. If the SCR turns on earlier, and stays on until dropout voltage, it will make the lamp appear brighter than if the SCR was turned on later and stayed on until dropout voltage, and was therefore on for a shorter time each cycle.
to make the revers biased p-n junction in SCR to be conducting.when we apply gate signal across gate and cathode it establish conducting part,thus the current from anode to cathode flow i.e main current.even after we remove the gate signal SCR in conducting mode because now this conducting path is maintain by main current i.e current from anode to cathode
because lekage current of silicon is less than germenium
pnpn
SCR or Silicon Controlled Rectifiers are Bipolar junctions Transistor ( Thyristor Family), SCRs are made of two transistors thats why they PNPN or NPNP devices. The three important parts of transistor are - Emitter, Collector & Base. & the Three Important parts of SCR are - Anode, Cathode & Gate. Use of SCRs- rectification of high power AC & power control applications, such as lamp dimming, regulators and motor control. Use of Transistors - switch, audio, high voltage, amplifiers, switcher
Explain why the innerlayer two layers of an scr are lightly doprd and are
A thyristor is another name for an SCR, which stands for Silicon Controlled Rectifier.Thyristors or SCRs are bi-directional devices used to control the flow of AC current. Once triggered, the device remains "on" until the next wave of current crosses zero after the trigger is removed.For more information about thyristors or SCRs see the Related link shown below.
because it is gcr not scr
The SCR's gate electrode is used to turn the SCR on, i.e. fire it.
thyristor can be scr or triac scr is strictly dc a triac is back to back scr's with a common gate two scr's back to back can be gated independently scrs cost less than triacs an scr can be combined with a full wave bridge to make an equivalent to a triac but this gives an additional 1.5V forward voltage drop
An SCR has three legs. The anode, cathode, and gate. The control voltage sent to the gate will allow the SCR to conduct.
Scr looks like a regulator IC. So keep the scr in such a way that its name should face us. then from left it will KAG.
A: Nothing after an SCR conduct the gate has no more control to shut it off. So how do we shut off an SCR two way reverse the voltage on the SCR or reduce the current below the holding current. SCR are not DC friendly once on they stay on until see above
The calculations for changing the firing angle in SCR is K = 1 [π − α + 1 sin(2α )]
SCR Casino del Real was created in 1917.